[EpiData-list] Winglue............GILLES

epidata-list at lists.umanitoba.ca epidata-list at lists.umanitoba.ca
Fri Feb 10 02:36:00 CST 2006


Hi,

Sorry , not the same   GILLES :)

Winglue is Menuing system wtrited as a replacement for Epiglue. It allow 
you to build menu in order to construct little application based on 
Epidata/Analysis/Epic
Winglue use a syntax very close to Epiglue syntax and allow to use VB 
script in the .mnu  file.

It's completely freeware and you can dowload it at 
www.epiconcept.fr/fichiers/winglue/winglue.zip

There is no install, but I wrote a little help file (winglue.wri)

Regards
Gilles DESVE
 
epidata-list at lists.umanitoba.ca a écrit :
> greetings.   Gilles, you mentioned Winglue....  is this the product distributed by AppSmith's?
> if not...what is it?  thanks.
>
> 	-----Original Message----- 
> 	From: epidata-list at lists.umanitoba.ca [mailto:epidata-list at lists.umanitoba.ca] 
> 	Sent: Tue 2/7/2006 3:28 PM 
> 	To: epidata-list at lists.umanitoba.ca 
> 	Cc: 
> 	Subject: [EpiData-list] Re: EpiData-list Digest, Vol 28, Issue 3
> 	
> 	
>
> 	Thanks a lot for these solutions.
> 	
> 	In fact, i found a solution this morning : I used the EXPORT.exe from
> 	an old version of Epi-Info with the EXECUTE command in epidata. It
> 	seems to work very well.
> 	
> 	By the way, i'd like to know if it is possible to use the BACKUP
> 	command twice ( in order to copy all .rec in a different repertory,
> 	that is used to export  and also make an archive each time I ( or the
> 	doctor in charge with this ) enter data.)
> 	
> 	Thanks again
> 	
> 	Jerome
> 	
> 	Externe au Centre de Recherche Clinique
> 	CHU d'Angers
> 	
> 	
> 	
> 	2006/2/7, epidata-list-request at lists.umanitoba.ca
> 	<epidata-list-request at lists.umanitoba.ca>:
> 	> Send EpiData-list mailing list submissions to
> 	>         epidata-list at lists.umanitoba.ca
> 	>
> 	> To subscribe or unsubscribe via the World Wide Web, visit
> 	>         http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> 	> or, via email, send a message with subject or body 'help' to
> 	>         epidata-list-request at lists.umanitoba.ca
> 	>
> 	> You can reach the person managing the list at
> 	>         epidata-list-owner at lists.umanitoba.ca
> 	>
> 	> When replying, please edit your Subject line so it is more specific
> 	> than "Re: Contents of EpiData-list digest..."
> 	>
> 	>
> 	> EpiData-list mailing list
> 	> ___________________________________
> 	>
> 	> Today's Topics:
> 	>
> 	>    1. Export code in a .chk file (epidata-list at lists.umanitoba.ca)
> 	>    2. RE: Export code in a .chk file (epidata-list at lists.umanitoba.ca)
> 	>
> 	>
> 	> ----------------------------------------------------------------------
> 	>
> 	> Message: 1
> 	> Date: Mon, 06 Feb 2006 23:46:06 ��
> 	> From: epidata-list at lists.umanitoba.ca
> 	> Subject: [EpiData-list] Export code in a .chk file
> 	> To: epidata-list at lists.umanitoba.ca
> 	> Message-ID: <43E7D1AE.6050003 at epidata.dk>
> 	> Content-Type: text/plain; charset="iso-8859-1"
> 	>
> 	>  > I'm searching how i could export data to spss using code in a check
> 	> file.The form is made out of 5 differents .rec, related by a KEY variable.
> 	>
> 	> The easiest would be to export the files via  the EpiC batch processor,
> 	> which you get from the Epidata.dk web site on the download page.
> 	> Include this in an "after file" block, which should work. Alternatively
> 	> if you system still blocks the file create a cmd or bat file containing
> 	> the epic commands, something like (experiment a bit):
> 	>
> 	> EpiC export spss file1 *  replace
> 	> EpiC export spss file2 *  replace
> 	> EpiC export spss file3 *  replace
> 	> EpiC export spss file4 *  replace
> 	> EpiC export spss file5 *  replace
> 	>
> 	> Now you have your five spss syntax files that you ran in SPSS.
> 	>
> 	> Other examples are:
> 	> EpiC e stata allaes *
> 	> Exports allaes.rec in the same directory as epic.exe to a new Stata file
> 	> with the filename allaes.dta. All records in allaes.rec are exported.
> 	>
> 	> EpiC e xls allaes * filter="ID=276"
> 	> Exports allaes.rec to allaes.xls. Only records where the field ID equals
> 	> the value 276 are exported.
> 	>
> 	> EpiC e SPSS allaes * filter="AESRATER='TP'"
> 	> Exports allaes.rec to allaes.dbf. Only records where AESRATER equals
> 	> 'TP' are exported.
> 	>
> 	> EpiC e epd allaes "c:\new\newallaes.rec" fromrec=100 torec=199 WITHDELS
> 	> REPLACE
> 	> Exports allaes.rec to a new epidata datafile called
> 	> c:\new\newallaes.rec. Only records #100-#199 are exported. Include
> 	> marked for deletion and replace the datafile.
> 	>
> 	> Regards
> 	>
> 	> Jens Lauritsen
> 	> EpiData Association
> 	>
> 	> ps. The ability to pay contributions with credit-card to EpIData
> 	> Association will be closed within a few weeks. The early contributions
> 	> only barely exceeds the costs for running that service. Future donations
> 	> (after the closure) will have to be made with bank-bank transfer.
> 	>
> 	>
> 	> ------------------------------
> 	>
> 	> Message: 2
> 	> Date: Tue, 7 Feb 2006 09:38:58 ��
> 	> From: epidata-list at lists.umanitoba.ca
> 	> Subject: RE: [EpiData-list] Export code in a .chk file
> 	> To: <epidata-list at lists.umanitoba.ca>
> 	> Message-ID:
> 	>         <A7EAEBFDDEDEF440A7BDD772C73046A2050C9C56 at xch-vac.ivs.local>
> 	> Content-Type: text/plain;       charset="iso-8859-1"
> 	>
> 	> Hi Jerome;
> 	> You should use EPIC command processor (http://www.epidata.dk/download.php#epic), in association with Winglue (or executed from a good old .BAT file). Epic can handle data export to numerous formats -including SPSS. Directions for use and syntax examples are provided.
> 	>
> 	> Best regards;
> 	>                         ______________________________________________
> 	>                         Gilles DELMAS
> 	>                         Institut de Veille Sanitaire
> 	>                         Dept. Maladies Infectieuses,
> 	>                         Unité infections entériques, alimentaires et zoonoses
> 	>                         12 rue du Val d'Osne 94415 Saint-Maurice cedex - France
> 	>                         + 33 1 41 79 67 27
> 	>                         g.delmas at invs.sante.fr
> 	>                         ______________________________________________
> 	>
> 	>
> 	>
> 	> -----Message d'origine-----
> 	> De : epidata-list at lists.umanitoba.ca [mailto:epidata-list at lists.umanitoba.ca]
> 	> Envoyé : lundi 6 février 2006 10:52
> 	> À : epidata-list at lists.umanitoba.ca
> 	> Objet : [EpiData-list] Export code in a .chk file
> 	>
> 	> Hi,
> 	>
> 	> I'm searching how i could export data to spss using code in a check file.
> 	> The form is made out of 5 differents .rec, related by a KEY variable.  But it's supposed to be used by someone who doesn't have a strong experience with computers. Is there a way to export these 5 files automaticly, and get the 5 .txt for spss export updated each record ?
> 	>
> 	> Thanks
> 	>
> 	> Jerome
> 	>
> 	>
> 	>
> 	> ------------------------------
> 	>
> 	> ________________________________________
> 	> EpiData-list at lists.umanitoba.ca
> 	> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> 	>
> 	>
> 	> End of EpiData-list Digest, Vol 28, Issue 3
> 	> *******************************************
> 	>
> 	
> 	
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> EpiData-list mailing list
> EpiData-list at lists.umanitoba.ca
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
>   


-- 
Dr Gilles DESVE
Directeur technique
Tél : 01 53 02 40 61

------------- EpiConcept -----------
Systèmes d'Information en Santé
47, rue de Charenton - 75012 PARIS
01 53 02 40 60  Fax : 01 53 02 40 62
--------- www.epiconcept.fr ---------

Ce message et toutes les pièces jointes sont établis à l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le détruire et d'en avertir l'expéditeur.





More information about the EpiData-list mailing list