Upcoming Ansys Webinars
Harness the full potential of Ansys simulation to achieve your product goals by registering for an upcoming webinar. Choose from the many topics below, or find additional webinars on the Ansys
calendar. Here are all of the webinars included in the email:
|
April 16, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Acceleration factors (AF) are essential variables when designing an effective accelerated life test (ALT). Attend this webinar to learn about acceleration factors, their impact on test protocols and their role in quickly determining the faults and failures
of a product.
|
April 16, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn to use simultaneous multiphysics simulations to design and optimize high-performance electric machines, without compromising solution accuracy. Topics include CFD thermal model creation for a water-cooled electric motor; one-way and two-way coupling between
electromagnetic and CFD solvers; and tips and tricks on modeling oil-spray cooling of electric motors.
|
April 21, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Explore Ansys simulation solutions for modeling PCBs and learn which techniques — trace mapping, trace modeling, lumped material models, etc. — are best-suited for solving specific design problems.
|
April 21, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Liquid cooling is increasingly required for advanced electronics that draw more power while occupying less space. Learn how Ansys Discovery simulations can help you compare design trade-offs from an architectural standpoint (size/shape of flow channel or number
of fins/veins) to determine requirements of associated systems, like pump sizing or cooler capacity.
|
April 21, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn the various ways you can enhance student engagement with engineering topics, and discover how Ansys GRANTA EduPack promotes learning in a range of engineering and design areas.
|
April 21, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how Ansys SPEOS enhancements in Ansys 2020 R1 will help you design the highest quality and most efficient lighting systems, which satisfy the needs of the global market and make use of eco-friendly products. Discover how to integrate a lighting device
into a specific environment by considering multiphysics behaviors — thermal, optical, mechanical and electronic — and optimize the shape and number of your lighting components.
|
April 21, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Computational fluid dynamics (CFD) analysis is a great tool for ensuring proper lubrication of rotating gears and bearings: It can help compute the immiscible motion of the oil–gas phase, as well as the temperature of components in gearboxes. Learn how Ansys
Fluent can be used for this application and receive an introduction to our new end-to-end automated workflow, ACT-Gearbox.
|
April 22, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn about recent innovations in Ansys Fluent that provide the widest range of multiphase models for the most accurate simulation of your toughest engineering challenges.
|
April 22, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how the Ansys Discovery topology optimization tool can be used for creating lightweight designs and readying your parts for additive manufacturing.
|
April 23, 2020, at 10 a.m. EDT / 2 p.m. GMT / 7:30 p.m. IST
Ansys Twin Builder offers several reduced-order modeling (ROM) techniques to speed up multiphysics 3D simulations without sacrificing accuracy.
This webinar is presented in Italian.
|
April 23, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how to model thermal management systems for electric vehicles and other applications using the heating and cooling library in Ansys Twin Builder, which includes models for heat exchangers, pumps, compressors, valves and other devices commonly used in
thermal management systems.
|
April 28, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
In recent years, materials have emerged as a focus of architectural pedagogy, based on the bold assertion that architecture design requires materials design. Learn about tools and resources to support teaching materials in architecture, along with innovative
concepts that can be used to demonstrate the value and power of a materials-based design approach.
|
April 28, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn about simulation solutions available for the initial design of electric machines, efficiency maps and temperature-dependent demagnetization. Discover a multiphysics coupled workflow that predicts the thermal performance and acoustic signature of a machine.
|
April 28, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how model-based development tools for high-reliability embedded control, display and human-machine interface applications enable you to support efficient embedded software development in accordance with DO-178C (up to DAL-A) requirements, FACE™ and ARINC
661.
|
April 29, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Discover how Ansys Additive Prep creates the right orientations or supports for your metal additive manufacturing (powder bed fusion) processes, with an easy-to-use interface and heat maps to guide the process from start to finish.
|
May 5, 2020, at 9 a.m. EDT / 1 p.m. GMT / 6:30 p.m. IST
Learn how Ansys Additive Manufacturing simulation solutions can be used to print a vehicle gearbox fork — a part requiring regular replacement from constant wear and tear. Discover how Ansys Additive Print can help you produce defect-free parts the first time
and every time.
This webinar is presented in Spanish.
|
May 5, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how simulation can help you design optimal inductive-based wireless power systems for charging biomedical implants, consumer electronics and even electric vehicles.
|
May 6, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how Ansys Additive Print metal AM process simulations can ensure your parts will print "first time right," while accurately predicting any failures like blade crash and compensating for any possible distortions.
|
May 7, 2020, at 10 a.m. EDT / 2 p.m. GMT / 7:30 p.m. IST
Discover how the Amsterdam-based startup Etergo is using Ansys GRANTA Selector as a source of reliable data for high-quality materials used in Ansys simulation solvers to design their next-generation smart electric scooter.
|
May 7, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn why an electronic assembly might fail reliability testing even when the FEA simulation predicts it should pass, and how to perform physical tests to ensure that realistic material properties are used in reliability testing.
|
May 12, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Ansys Discovery is replacing traditional CAD technologies with direct editing and a modern UI that is fast, easy and intuitive to learn. Learn how Discovery can import, repair and modify files from any CAD system, and then perform instantaneous simulations
in real time so you can test your product’s performance virtually without waiting for results.
|
May 13, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how Ansys Additive Science can be used for micro-level predictions of your metal additive manufacturing process — like the microstructure and porosity of the part — and how to use this data for your part qualification purposes.
|
May 13, 2020, at 11 a.m. EDT / 3 p.m. GMT / 8:30 p.m. IST
Learn how Optima Design Automation and Ansys are helping automotive engineers with a new solution for mapping semiconductor designs to the key functions they support within a vehicle — and ensuring that semiconductors will perform flawlessly to support consistent
vehicle performance and outstanding passenger safety. |
