FYI In my opinion much better than the Canadian TAC document “...1.1. PROBLEM STATEMENT AND RESEARCH OBJECTIVE The objective of this project was to prepare a comprehensive update to the 1999 AASHTO Guide for the Development of Bicycle Facilities. The Guide is recognized and accepted throughout the United States as the national guideline for bicycle facility planning and design. It has evolved over time - the 1981 edition of the Guide was 31 pages long and had only four pages of guidance on designing on‐road bicycle facilities. By the time the 1999 edition was published, the Guide had more than doubled in length, with considerably more information on planning, on‐road bicycle facility design, shared use path design, and operations and maintenance. Usage of the Guide has grown rapidly as nationwide spending on bicycle facilities has increased. Each successive federal transportation bill since ISTEA in 1991 has increased funding for bikeway construction in the U.S. Despite its popularity and utility, however, the 1999 edition of the Guide lacks important information, and does not reflect significant research findings of the past decade. Additionally, parts of the Guide need to incorporate changes from updated national references such as the "Manual on Uniform Traffic Control Devices" (MUTCD) and the AASHTO "Policy on Geometric Design of Highways and Streets," (AASHTO "Green Book"), among others. In 2004, the NCHRP Task 187 Report entitled "Updating the AASHTO Guide for the Development of Bicycle Facilities" conducted initial research, interviews, and a literature review to determine the recommended scope and content of the next edition of the Guide. That report made recommendations for numerous changes to the 1999 Guide. The new draft of the Guide incorporates these recommendations, along with new guidance and research, and practical experience gained through the design and construction of bikeways throughout the United States....” http://onlinepubs.trb.org/onlinepubs/nchrp/docs/NCHRP_15-37_FR.pdf
204.488.8988
