Respected Sir,
I am Elango from India.
I have operating computer,internet and speet typing knowledge ..So i am interest doing online and offline data entry job .so please any this type of job inform me ..
Thank you ..sir,
---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
One further aspect of select:
One user wrote
> The last data set I worked on included 5,227 records.
> The data base was originally on Excel, then I imported it in DBase
III,
> and then in Epi Data. For variables with only one character (for
> instance sex: M or F), I have in fact 12 chararcters. So I could not
> select the variable sex = \"M\" without the \"trim\" gimmick. So
doing
> select trim (sex)=\"M\" now it works beautifully. Thanks a lot
Arnaud
So the select example should be extended to say:
* if imported data and select is not working, try trim() on your field,
e.g.:
select trim (sex)="M"
regards Jens Lauritsen
In the new part of documentation (from v0.9 build 10 of analysis) there
is a file with "how to ..." on this topic the content is:
Select by date - existing variable
Solution: use the built in formulae.
Adapt according to your date format (dmy/mdy/ymd)
E.g. to select all born before 12th of february 1988:
Select birthday < dmy(12,2,1988)
Select birthday < date("02/12/1988","mdy")
Select birthday < date("12/02/1988","dmy")
The first uses function dmy(,,), the second date(,) with mdy and the
third date(,) with "dmy".
regards Jens Lauritsen
>>> <epidata-list(a)lists.umanitoba.ca> 22-10-2004 08:27:30 >>>
Dear Sir
Greetings
Kindly tell me some examples about select date variable
I have variable in which i stored the date in (dd/mm/yyyy) format.
but in analyis i use select command to selecting the date it does not
work.
I type the SELECT SYNATX LIKE THAT on command prompt
MY DATE VARIABLE IS - A39 THIS VARIABLE TYPE IS (DD/MM/YYYY)
SELECT A39 > "10/10/1959"
-----------------------------
IT GIVES THE MESSAGE INCOMPATIBLE STRING VARIABLE . BUT IN EPINFO -60.4
IT WORKS VERY GOOD.
TELL ME SOME EXAMPLES HOW SHOULD I USE THE SELECT COMMAND TO SELECT > ,
< DATE IN EPIDATA ANALYSIS
PLESE REPLY SOON I AM WATING
THANKING YOU
_______________________________________________
EpiData-list mailing list
EpiData-list(a)lists.umanitoba.ca
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
I am in the process of building a set of pgm files which will assert
whether the precision of the analysis programme is sufficient or not.
The idea is to compare with standard or reference values for a number of
tests known as the NIST standard datasets.
If someone are willing to put in some hours of work in this let me
know. I expect at the end we will publish a paper on this.
regards
Jens Lauritsen
Jens M. Lauritsen, Consultant,MD. PhD.
The EpiData Association, (EpiData Foreningen)
Enghavevej 34, DK5230 Odense M. Denmark
e-mail: info(a)epidata.dk
For E-mail news on EpiData: http://www.epidata.dk/php/maillist.php
EpiData is freeware
_______________________________________________
EpiData-list mailing list
EpiData-list(a)lists.umanitoba.ca
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
Dear Sir
Greetings
Kindly tell me some examples about select date variable
I have variable in which i stored the date in (dd/mm/yyyy) format.
but in analyis i use select command to selecting the date it does not work.
I type the SELECT SYNATX LIKE THAT on command prompt
MY DATE VARIABLE IS - A39 THIS VARIABLE TYPE IS (DD/MM/YYYY)
SELECT A39 > "10/10/1959"
-----------------------------
IT GIVES THE MESSAGE INCOMPATIBLE STRING VARIABLE . BUT IN EPINFO -60.4 IT WORKS VERY GOOD.
TELL ME SOME EXAMPLES HOW SHOULD I USE THE SELECT COMMAND TO SELECT > , < DATE IN EPIDATA ANALYSIS
PLESE REPLY SOON I AM WATING
THANKING YOU
Around 150 persons have downloaded the first release (v0.9 build 9).
Most bugs and corrections pointed out are removed or identified.
A new build 10 is now placed on Http://www.epidata.dk/testing.php
See changes at Http://www.epidata.dk/analysisinfo/docs/versioninfo.htm
Further discussions are encouraged on this list.
regards
Jens Lauritsen
Jens M. Lauritsen, Consultant,MD. PhD.
The EpiData Association, (EpiData Foreningen)
Enghavevej 34, DK5230 Odense M. Denmark
e-mail: info(a)epidata.dk
For E-mail news on EpiData: Http://www.epidata.dk/php/maillist.php
EpiData is freeware
Following a lot of effort by several persons including
JM. Lauritsen: Coordinator. Design, implementation, documentation,
programming(2001-2004)
Salah Mahmud Design, Programming and Implementation of data management,
commands and functions (2002-2003)
Further contributions
Programming from 2004: M.Bruus, F.Boelsmand, T.Christiansen, S Kreiner
Further Specification, Assistance and/or pre-testing: V.Høgli,J.Hockin,HL
Rieder,P Arias Bohigas,
JC Fernández Merino,C. Green,G. Daurat,M Myatt,T Stewart and others
And funding from those mentioned on the funding page
Http://www.epidata.dk/funding.htm.
It is now possible to have an open testing round of the EpiData Analysis
programme.
The first release (v1.0) is expected within a few weeks if few problems
show up, and few months if severe problems show up in the testing.
The programme is available from the test page
(http://www.epidata.dk/testing.php)
Please assist in testing.
Jens M. Lauritsen, Consultant,MD. PhD.
The EpiData Association, (EpiData Foreningen)
Enghavevej 34, DK5230 Odense M. Denmark
e-mail: info(a)epidata.dk
For E-mail news on EpiData: Http://www.epidata.dk/php/maillist.php
EpiData is freeware
Dear Katie,
Please do the following:
1. Goto File -> Options -> Choose tab titled "Create Data File" and Select
the redio button "Automatic Field Names"
2. Make your .QES file with appropriate labels Like
Variable One is Auto ID: <AutoID>
Two is Text: <AAAAAAAAAAAAA>
And So on and on: ###.##
3. Once you are satisfied with the alignmen and all, mark the variable names
with braces within the labels, without changing anything in the resulting
alignment alignment like:
{Var}iable One is Auto {ID}: <AutoID>
{T}wo is {T}ext: <AAAAAAAAAAAAA>
And {So on} and on: ###.##
4. Save the .QES file, go to "make data file" and follow through. The names
would be "varid", "tt" and "soon". Any further changes will not affect the
names so long as the text withing braces stays the same.
Good Luck
Gillani
I was hoping someone could help me with this...
After creating a .QES file, I made a .REC data file and renamed all of my
variables using the option in the Tools menu. I did this so that I
wouldn't need to display variable names on the form. I had to go back and
make a minor revision to the .QES file. When I revised my data file from
the revised .QES file, all of my variables logically changed back to their
original names. Is there any way around this?
Thanks,
Katie