October 2011 - EpiData-list - University of Manitoba Mailing Lists

Jumps in Epidata Entry
by epidata-list＠lists.umanitoba.ca 15 Jul '26

15 Jul '26

Dear list, I have two questions regarding Jumps in EpiData Entry. 1) I want to jump to variable v10 if de score for v8 is 1 to 7. Of course this works: v8 RANGE 1 9 COMMENT LEGAL USE oplcat JUMPS 1 v10 2 v10 3 v10 4 v10 5 v10 6 v10 7 v10 END MUSTENTER END Is a shorter syntax possible and if so, how? 2) Is it possible to make a jump defination that depends on the value entered in a previous question? For example: After entering the value for variable v5 I want to jump to v8 if the answer on question v3=1. Kind Regards, Pieter van Groenestijn The Netherlands

2 3

fill fields from COMMENT LEGAL file
by epidata-list＠lists.umanitoba.ca 15 Jul '26

15 Jul '26

I'm studying the copydata example to learn how to extract several variables from a file identified in a COMMENT LEGAL statement. In A3.chk, the statement "TYPE COMMENT atransfer" appears. What is atransfer? I don't see where it has been defined as a variable and I don't find it as a system variable. Further, the program seems to be parsing the string in atransfer according to the position of punctuation. Where is the format of this string defined? Perhaps to be a bit more explicit: I have file with a list of CHWs: District, Village, CHW name and a survey conducted by the CHWs. As the data is entered for the survey, I'd like to present pick lists to facilitate entry. The data is quite strictly hierarchical: Villages occur within Districts, an CHWs live in villages. Thank you,

2 3

epidata as relational database for disaster electronic medical record
by epidata-list＠lists.umanitoba.ca 01 Nov '11

01 Nov '11

In 2006, our region suffered massive flooding. We even had to evacuate one hospital to another. We opened an evacuation shelter in the gymnasium at the local university. One section was basically a field hospital for the medically needy evacuees. Our patient record-keeping at that time was a little week. We recently suffered another massive flood, several-fold worse than 2006. 30,000 people, 15% of our county's population,were evacuated. We had 1800 people in an evacuation shelter in that same gymnasium. About 100 were "medical needs" evacuees--oxygen, BiPAP, skilled nursing needs, etc. Our record keeping was better this time, but still left something to be desired. I'm brainstorming ideas, both paper and electronic. Does anyone have any experience using Epidata as a relational database, so as to serve as a simple lightweight electronic medical record during a disaster? Thanks. --Chris Ryan, MD Clinical Associate Professor of Family Medicine SUNY Upstate Medical University, Binghamton, NY and Medical Director, Broome County Health Department

1 7

EpiData and MPH Training
by epidata-list＠lists.umanitoba.ca 01 Nov '11

01 Nov '11

Greetings from Burlington, I am a new member of epidata-list, and I am keen to receive advice about incorporating training in EpiData Entry and Analyst in the MPH Program at the Dalla Lana School of Public Health at the Univ. of Toronto. I teach the course on Public Health Surveillance in the second term. This will be the second year that I oversee this course, and I would like to find some better way to integrate the lectures and the exercises, perhaps through EpiData training. I suspect that EpiData would be ideal for introducing the principles and basic skills required for CD outbreak detection and management. But I think it might also be useful for cluster investigation, socio-demographic profiles (e.g., recent immigrants in a PHU area) and monitoring behavioural RF over time. Keen to hook up with epidata-list members who have some experience offering training in EpiData at the MPH level. Keen to find useful teaching exercises that are shareable, too. Most grateful for any advice! Sincerely, Eric J. Holowaty, Professor, Div. of Epidemiology, Dalla Lana School of Public Health, Univ. of Toronto.

1 2

EpiData 3.1. blank line output
by epidata-list＠lists.umanitoba.ca 25 Oct '11

25 Oct '11

Dear members of the EpiData-Team, I am writing to you with the following question/concern: I am using the programme EpiData 3.1. to insert data from a questionnaire, where in the end every line contains the data from one questionnaire. In a newly established table the first line is without entry while the following lines contain data, though I thought that this is impossible in EpiData - is there any explanation how this blank line could have happened? Is it possible to save a line without having inserted any data in the original questionnaire form? Thanks a lot to everybody, greetings from Germany, Nina-Claire Himpe

1 3

importing data to epidata from excel sheet
by epidata-list＠lists.umanitoba.ca 23 Oct '11

23 Oct '11

Dear friend Hope all is well. Would you please remind me of how to import data from excel sheet into epidata. Thanks alot for your help and time Mohd

1 4

Backup command truncation problem
by epidata-list＠lists.umanitoba.ca 17 Oct '11

17 Oct '11

Hello Everyone, I have encountered backup command truncation isuue. I am using the following commands for backup, AFTER FILE BACKUP C:\research\CD\Epidata\backup\epi ENCRYPT filenameXXX PASSCODEXXX [TODAY] END This code works perfectly when I am using it. Once I close the program and reopen, it is truncated to, AFTER FILE BACKUP C:\research\CD\Epidata\backup\epi END I will appriciate your thoughts and help on this issue. Thank you. Bijay Adhikari, PhD CD Epidemiologist

1 1

release candidate for manager and entryclient - please test and comment
by epidata-list＠lists.umanitoba.ca 15 Oct '11

15 Oct '11

We have now uploaded what is intended as the release candidate for version 1 of EpiData Manager and EntryClient. Users are encouraged to: a. test the software b. comment on this list whether you find the products ready for release with the currently implemented functionality. Remaining issues before actual release are: a. Completing technical documentation on the wiki system at www.epidata.org/dokuwiki/ including a schema file for the xml b. Updating and finalising introduction documents and guides c. Updating wiki system with examples d. Fixing any bugs reported Following release of version 1 development continues and will focus on: Translation of interface, several dataforms in one project, key (unique), validation of duplicate files, GCP etc. In the current test release the following has been changed: Core changes: (mostly used in manager) Enhanced export to Stata (Notes, time fields, encoding of strings, string fields) Notes on Field/Dataset during import. Entry: Saves recent file after load/save of file. Manager: Open project automatically added to reportlist Settings for export to stata Bugs fixed: deleting section did not cleanup components correctly shortcuts (wrong form execution, paste as bug, ....) extend space function adds one "page down" Regards Torsten Christiansen and Jens Lauritsen EpiData Association

1 0

Re: How to jump a line in a Warning box?
by epidata-list＠lists.umanitoba.ca 11 Oct '11

11 Oct '11

Hi Zaw, I'm feeling like stupid for not having seen this....Many thanks for your help. Regards, Sophie. --Pièce jointe du message transmise-- From: epidata-list(a)lists.umanitoba.ca To: epidata-list(a)lists.umanitoba.ca Date: Tue, 11 Oct 2011 07:37:28 +0100 Subject: [EpiData-list] Re: How to jump a line in a Warning box? Hi, Sophie, It should be a backslash "\n". Your syntax should be as below: BEFORE ENTRY HELP "Mesurez le périmètre à mi-distance*\n* entre le rebord postérieur de l’acromion et le sommet de l’olécrane" END Best wishes, Zaw > > Message: 2 > Date: Sun, 9 Oct 2011 19:37:49 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] How to jump a line in a Warning box? > To: <epidata-list(a)lists.umanitoba.ca> > Message-ID: <BAY155-W509A6867E535C4760997897FC0(a)phx.gbl> > Content-Type: text/plain; charset="Windows-1252" > > > Hi everybody, > I would like to have a two-line warning box. I saw that I need to add "/n" > but this does not work.Here my syntax: > armcirc > MUSTENTER > BEFORE ENTRY > HELP "Mesurez le périmètre à mi-distance/n entre le rebord postérieur de > l’acromion et le sommet de l’olécrane" > END > END > I would appreciate if someone can help me. > Sophie. > > >

1 0

Re: How to jump a line in a Warning box?
by epidata-list＠lists.umanitoba.ca 11 Oct '11

11 Oct '11

Hi, Sophie, It should be a backslash "\n". Your syntax should be as below: BEFORE ENTRY HELP "Mesurez le périmètre à mi-distance*\n* entre le rebord postérieur de l’acromion et le sommet de l’olécrane" END Best wishes, Zaw On Mon, Oct 10, 2011 at 6:00 PM, <epidata-list-request(a)lists.umanitoba.ca>wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. How to calculate age (epidata-list(a)lists.umanitoba.ca) > 2. How to jump a line in a Warning box? > (epidata-list(a)lists.umanitoba.ca) > 3. Chi square for tren (epidata-list(a)lists.umanitoba.ca) > 4. Re: Chi square for tren (epidata-list(a)lists.umanitoba.ca) > 5. How to calculate chi square for trend > (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 9 Oct 2011 19:08:30 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] How to calculate age > To: <epidata-list(a)lists.umanitoba.ca> > Message-ID: <BAY155-W179F539EAF514289D1437E97FC0(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > > Dear Hans, > Thank you for your reply but I also saw this mistakes. > Many thanks. > > --Pièce jointe du message transmise-- > From: epidata-list(a)lists.umanitoba.ca > To: epidata-list(a)lists.umanitoba.ca > Date: Sat, 8 Oct 2011 19:24:19 +0200Envoyer > Subject: Re: [EpiData-list] How to calculate age > > Dear Sophie: > > You cannot have "BEFORE ENTRY" in a "NOENTER" field because no command > in that field can ever be executed. > > Better choose an "AFTER ENTRY" block in the field in which you added the > last component that is needed to calculate the age, i.e., in the field DoB. > > To this end you may try: > > Your QES file: > age ##.# > recdate <Today-dmy> > dob <dd/mm/yyyy> > other _ > > Your CHK file: > age > NOENTER > END > > dob > MUSTENTER > AFTER ENTRY > age=(recdate-dob)/365.25 > END > END > > Regards, > > Hans > > > On 20:59, epidata-list(a)lists.umanitoba.ca wrote: > > Hello everybody, > > I am trying to write a syntax in .chk file to automatically calculate age > during the data entry from the today's date and the DoB.The syntax is : > > " ddn > > MUSTENTER > > END > > > > > > age > > NOENTER > > BEFORE ENTRY > > let age=ound(int((date-ddn)/(365.25)))) > > END > > END" > > The variables are coded in the .qes file as follows: > > {DATE} automatique<Today-dmy>{DDN} DATE DE NAISSANCE (DATE OF > BIRTH)<dd/mm/yyyy>{AGE} automatique > ### > > What's wrong with my syntax? > > Sincerely hope you can help me. > > Regards, > > Sophie PilleronPhD student. > > > > -- > Hans L Rieder, MD, MPH > Jetzikofenstr 12 > 3038 Kirchlindach > Switzerland > > Tel: +41 31 829 4577 > Mob: +41 79 321 9122 > Web: http://www.tbrieder.org > > > > > > --Pièce jointe du message transmise-- > From: epidata-list(a)lists.umanitoba.ca > To: epidata-list(a)lists.umanitoba.ca > Date: Sat, 8 Oct 2011 20:04:14 +0200 > Subject: [EpiData-list] How to calculate age > > > > Many thanks Jamie. It works now. I will never have found out my mistake > without your support. Thanks again. > Sophie. > > > --Pièce jointe du message transmise-- > From: epidata-list(a)lists.umanitoba.ca > To: epidata-list(a)lists.umanitoba.ca > Date: Sat, 8 Oct 2011 16:41:29 +0200 > Subject: [EpiData-list] How to calculate age > > > Hello everybody, > I am trying to write a syntax in .chk file to automatically calculate age > during the data entry from the today's date and the DoB.The syntax is : > " ddn > MUSTENTER > END > > > age > NOENTER > BEFORE ENTRY > let age=(round(int((date-ddn)/(365.25)))) > END > END" > The variables are coded in the .qes file as follows: > {DATE} automatique > <Today-dmy>{DDN} DATE DE NAISSANCE (DATE OF BIRTH) > <dd/mm/yyyy>{AGE} automatique > ### > What's wrong with my syntax? > Sincerely hope you can help me. > Regards, > Sophie PilleronPhD student. > > > > --Pièce jointe du message transmise-- > From: epidata-list(a)lists.umanitoba.ca > To: epidata-list(a)lists.umanitoba.ca > Date: Sat, 8 Oct 2011 12:42:47 -0400 > Subject: Re: [EpiData-list] How to calculate age > > You cannot have a field named DATE because that is the name of a function. > EpiData doesn't complain when you do this, but you cannot use any function > names as field names. > > Jamie > > On 2011-10-08, at 10:41 AM, epidata-list(a)lists.umanitoba.ca wrote: > > > let age=(round(int((date-ddn)/(365.25)))) > > > > > > ------------------------------ > > Message: 2 > Date: Sun, 9 Oct 2011 19:37:49 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] How to jump a line in a Warning box? > To: <epidata-list(a)lists.umanitoba.ca> > Message-ID: <BAY155-W509A6867E535C4760997897FC0(a)phx.gbl> > Content-Type: text/plain; charset="Windows-1252" > > > Hi everybody, > I would like to have a two-line warning box. I saw that I need to add "/n" > but this does not work.Here my syntax: > armcirc > MUSTENTER > BEFORE ENTRY > HELP "Mesurez le périmètre à mi-distance/n entre le rebord postérieur de > l’acromion et le sommet de l’olécrane" > END > END > I would appreciate if someone can help me. > Sophie. > > > ------------------------------ > > Message: 3 > Date: Sun, 9 Oct 2011 21:54:56 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] Chi square for tren > To: epidata-list(a)lists.umanitoba.ca > Message-ID: > <CAEJOQjcQ1a2MdohdRM_DbYFwdLtKVqs-dey9Bqo7zKcCF30tOA(a)mail.gmail.com > > > Content-Type: text/plain; charset=ISO-8859-1 > > Dear all > Hope you are doing well. I would appreciate it if you can kindly tell me > how > I can perform Chi square for trend in epidata analysis. > Thanks a lot > Mohammed > > > ------------------------------ > > Message: 4 > Date: Sun, 09 Oct 2011 22:36:52 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: Re: [EpiData-list] Chi square for tren > To: epidata-list(a)lists.umanitoba.ca > Message-ID: <4E9205E4.1040604(a)epidata.dk> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > On 2011-10-09 21:54, epidata-list(a)lists.umanitoba.ca wrote: > > Dear all > > Hope you are doing well. I would appreciate it if you can kindly tell me > how > > I can perform Chi square for trend in epidata analysis. > > Thanks a lot > > Mohammed > > _______________________________________________ > > EpiData-list mailing list > > EpiData-list(a)lists.umanitoba.ca > > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > Currently a chi square test for trend is NOT implemented. But it is > quite easy. > > Just do the tabulation (crosstable) and when you have the numbers. Start > internet and get to the http://openepi.com webpage, where you can enter > the table and get the statistic from the menu at "dose response" or the > direct link: > http://openepi.com/OE2.3/DoseResponse/DoseResponse.htm > > If you have no direct internet link, you can download openepi when you > have access and use without persistent internet connection. > > regards > Jens Lauritsen > EpiData Association > > > ------------------------------ > > Message: 5 > Date: Mon, 10 Oct 2011 10:30:24 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] How to calculate chi square for trend > To: epidata-list(a)lists.umanitoba.ca > Message-ID: > <CAEJOQjcQ_dgW_TPK7r-xtLroK5QWJzgSOc5kOvXnD8fRy5z-MA(a)mail.gmail.com > > > Content-Type: text/plain; charset=ISO-8859-1 > > Dear all > > Would you please let me know if we can can calculate chi square in EpiData > analysis and if yes how we do that? > > Thanks > Mohammed > > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 96, Issue 4 > ******************************************* >

1 0