EpiData-list September 2005

epidata-list@lists.umanitoba.ca

1 participants
19 discussions

Final release candidate of EpiData Analysis is available now

by epidata-list＠lists.umanitoba.ca

Good Colleagues The final release candidate for version one of EpIData Analysis has now been placed at Http://www.epidata.dk/testing.php A 7 page introduction document is also available. If none of you find any major errors version one is just around the corner for public release. All reported errors have been fixed. Several requests for features have been sent. These will be prioritised for later. Including work on versions in languages other than English. On EpiData.dk some reconstruction will take place in regards to downloading and credits etc. Also the funding.htm page has not been fully updated during this year. The updating is expected within a few weeks. Kind regards Jens Lauritsen EpiData Association

18 years, 7 months

Appending

by epidata-list＠lists.umanitoba.ca

Dear Eleni: There are two ways to append - one is within EpiData, the other highly efficient within EpiData Analysis. If you append (not merge) files with the same same structure, try this in EpiData Analysis, ver 0.9 build 38: * ----Program begins next line cls logclose close * switch to the folder where your REC files are located cd c:\temp1 erase "abcd.rec" read "a.rec" append "b.rec" append "c.rec" append "d.rec" savedata "abcd.rec" close * Do some tabulation to check read "abcd.rec" tables sex res1 logclose * --- Program has ended previous line Best regards, Hans -- Hans L Rieder, MD, MPH Jetzikofenstr. 12 3038 Kirchlindach Switzerland Tel: +41 31 829 4577 Mob: +41 79 429 9945 Web: http://www.tbrieder.org

18 years, 8 months

Printing Tables

by epidata-list＠lists.umanitoba.ca

Please forgive my ignorance of the program. I am trying to print off a number of tables that I have generated. Preferably one per page and have not been able to accomplish this. Is it possible to do and if so how? Thank you.

18 years, 8 months

Re Exporting labels to Excel?

by epidata-list＠lists.umanitoba.ca

Hello! Is it possible to export the data labels to Excel file as well? (e.g. to have labels instead of the variables name then, it works for SPSS and Stata, but could not find it for Excel). Thank you in advance! /Ziad -- Ziad El-Khatib Division of International Health (IHCAR) Department of Public Health Sciences Karolinska Institutet Norrbacka 2nd Floor SE-171 76 Stockholm, Sweden Tel: +46 (0)8 51770185 Mobile: +46 (0) 73 776 48 59 Fax: +46 (0)8 311590

18 years, 8 months

Automating Append/Merge

by epidata-list＠lists.umanitoba.ca

Use EpiC, which you can download from the epidata website. EpiC let's you send commands to EpiData. It's all explained in the documentation. You can set up a sequence of commands in a file and get Windows to run them whenever you want. Jamie Hockin Public Health Agency of Canada 1. Query: Append/merge (epidata-list(a)lists.umanitoba.ca) > Is there a way to run append/merge commands in an automatic way? >I mean not running them through epidata menu. > >Thanks in advance > >Eleni Kalamara >Hellenic centre for infectious diseases control > >

18 years, 8 months

RE: EpiData-list Digest, Vol 23, Issue 1

by epidata-list＠lists.umanitoba.ca

Hi; I propose you this Edit controls for VAR1: VAR1 if VAR1 = 1 then hide VAR10 ELSE unhide VAR10 ENDIF END END In this case, var10 will be greyed, and no entry will be possible as soon as var1 is put to 1; the second if is necessary in case you decide, once VAR1 has been put to 1 to come back to it, and to put another value. If 'unhide' is not specified, Var10 would stay unusable. Dr DIBY JEAN-PAUL KONAN Médecin Santé Publique Resp. Unité Epidémiologie INSP Côte d'Ivoire BPV 47 Abidjan epidata-list-request(a)lists.umanitoba.ca a écrit : Send EpiData-list mailing list submissions to epidata-list(a)lists.umanitoba.ca To subscribe or unsubscribe via the World Wide Web, visit http://lists.umanitoba.ca/mailman/listinfo/epidata-list or, via email, send a message with subject or body 'help' to epidata-list-request(a)lists.umanitoba.ca You can reach the person managing the list at epidata-list-owner(a)lists.umanitoba.ca When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..." EpiData-list mailing list ___________________________________ Today's Topics: 1. NOENTER? SKIP? Ifthen? (epidata-list(a)lists.umanitoba.ca) ---------------------------------------------------------------------- Message: 1 Date: Mon, 5 Sep 2005 18:00:39 -0500 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] NOENTER? SKIP? Ifthen? To: Message-ID: <346E71A112CE(a)grade.org.pe> Content-Type: text/plain; charset="iso-8859-1" Hi I am a begginer in EpiData. I don't understand the syntax for doing the following task in the check file: If var1 = 1 , then I need the field of var10 in the "data entry form" to be locked. How do I do this? I tried: var10 BEFORE ENTRY IF (var1=1) THEN HIDE var10 ENDIF END END But it does not work Thanks for your help Kristian ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 23, Issue 1 ******************************************* --------------------------------- Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez le ici !

18 years, 8 months

Query: Append/merge

by epidata-list＠lists.umanitoba.ca

To all list members: Is there a way to run append/merge commands in an automatic way? I mean not running them through epidata menu. Thanks in advance Eleni Kalamara Hellenic centre for infectious diseases control

18 years, 8 months

RE: [EpiData-list] NOENTER? SKIP? Ifthen?

by epidata-list＠lists.umanitoba.ca

Hi; Try the following: Edit controls for VAR1: VAR1 if VAR1 = 1 then hide VAR10 ENDIF if VAR1 <> 1 then unhide VAR10 ENDIF END END In this case, var10 will be greyed, and no entry will be possible as soon as var1 is put to 1; the second if is necessary in case you decide, once VAR1 has been put to 1 to come back to it, and to put another value. If 'unhide' is not specified, Var10 would stay unusable. What you did could not work: VAR10 can't be hidden once you are on it. Good luck! ______________________________________________ Gilles DELMAS Institut de Veille Sanitaire Dept. Maladies Infectieuses, Unité infections entériques, alimentaires et zoonoses 12 rue du Val d'Osne 94415 Saint-Maurice cedex - France + 33 1 41 79 67 27 g.delmas(a)invs.sante.fr ______________________________________________ -----Message d'origine----- De : epidata-list(a)lists.umanitoba.ca [mailto:epidata-list@lists.umanitoba.ca] Envoyé : mardi 6 septembre 2005 01:01 À : epidata-list(a)lists.umanitoba.ca Objet : [EpiData-list] NOENTER? SKIP? Ifthen? Hi I am a begginer in EpiData. I don't understand the syntax for doing the following task in the check file: If var1 = 1 , then I need the field of var10 in the "data entry form" to be locked. How do I do this? I tried: var10 BEFORE ENTRY IF (var1=1) THEN HIDE var10 ENDIF END END But it does not work Thanks for your help Kristian

18 years, 8 months

NOENTER? SKIP? Ifthen?

by epidata-list＠lists.umanitoba.ca

Hi I am a begginer in EpiData. I don't understand the syntax for doing the following task in the check file: If var1 = 1 , then I need the field of var10 in the "data entry form" to be locked. How do I do this? I tried: var10 BEFORE ENTRY IF (var1=1) THEN HIDE var10 ENDIF END END But it does not work Thanks for your help Kristian

18 years, 8 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

EpiData-list September 2005