Dear Jan and all Listers,
I am sorry for not providing detailed information earlier.
Well, I am using EpiData 3.1, and extract of the check file is provided at
the end.
I wished to do data validation using the Double Entry Verification mode,
but when I used an automatically generated unique identifier for
the records using three fields(district,school and student) it could not
prompt for correction even when there was discordance.
The key-field I selected *to prepare for double entry verification* was '*
UNIQUE*'. However, when I selected key-field as '*STUDENT*' there was
prompting for discordance. And yet student number alone may not uniquely
identify records in the data set.
What is the solution?
DISTRICT
COMMENT LEGAL USE label_district
MUSTENTER
REPEAT
TYPE COMMENT
END
SCHOOL
MUSTENTER
REPEAT
END
SCHNAME
MUSTENTER
REPEAT
END
STUDENT
RANGE 1 100
MUSTENTER
AFTER ENTRY
UNIQUE=DISTRICT+"-"+SCHOOL+"-"+STUDENT
END
END
UNIQUE
KEY UNIQUE
NOENTER
TYPE STATUSBAR "DIST-SCH-STD=" GREEN
END
GENDER
LEGAL
1
2
END
COMMENT LEGAL USE label_gender SHOW
MUSTENTER
TYPE COMMENT
END
AGE
RANGE 10 50
MUSTENTER
END
M1
LEGAL
0
1
END
MUSTENTER
END
M2
LEGAL
0
1
END
MUSTENTER
END
Kizito.
On 19 September 2013 20:00, <epidata-list-request(a)lists.umanitoba.ca> wrote:
> Send EpiData-list mailing list submissions to
> epidata-list(a)lists.umanitoba.ca
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> or, via email, send a message with subject or body 'help' to
> epidata-list-request(a)lists.umanitoba.ca
>
> You can reach the person managing the list at
> epidata-list-owner(a)lists.umanitoba.ca
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of EpiData-list digest..."
>
>
> EpiData-list mailing list
> ___________________________________
>
> Today's Topics:
>
> 1. Re: Automatic Unique Identifier and Double Entry Verification
> Mode (epidata-list(a)lists.umanitoba.ca)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 18 Sep 2013 20:11:54 +0200
> From: epidata-list(a)lists.umanitoba.ca
> Subject: Re: [EpiData-list] Automatic Unique Identifier and Double
> Entry Verification Mode
> To: epidata-list(a)lists.umanitoba.ca
> Message-ID: <5239ECEA.1050109(a)tbrieder.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Dear Kizito:
>
> It is a good rule to provide complete information before requesting
> assistance. Your message is non-informative about the software
>
> Does your question concern:
> - EpiData Entry 3.1?
> - EpiData Manager, and if so which version?
> - If you use EpiData Entry 3.1, could you show the part of the check
> file that controls the field?
>
> Without this information, one cannot answer.
>
> Hans
>
>
> On 18-Sep-13 11:19, epidata-list(a)lists.umanitoba.ca wrote:
> > Dear Listers,
> >
> > sorry I am asking this again, since I received no help yet.
> >
> > I wanted to do data validation using the Double Entry Verification mode,
> > but when I used an automatically generated unique identifier for the
> > records using three field it could not prompt for correction even when
> > there was discordance.
> >
> > What is the solution?
> >
> > Kizito
> >
>
> --
> Hans L Rieder, MD, MPH
> Jetzikofenstr 12
> 3038 Kirchlindach
> Switzerland
>
> Tel: +41 31 829 4577
> Mob: +41 79 321 9122
> Web: http://www.tbrieder.org
>
>
>
>
> ------------------------------
>
> ________________________________________
> EpiData-list(a)lists.umanitoba.ca
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
>
>
> End of EpiData-list Digest, Vol 119, Issue 12
> *********************************************
>
Dear Listers,
sorry I am asking this again, since I received no help yet.
I wanted to do data validation using the Double Entry Verification mode,
but when I used an automatically generated unique identifier for the
records using three field it could not prompt for correction even when
there was discordance.
What is the solution?
Kizito
Dear All
Stuck with exporting issues with epidata manager to SPSS
Can anyone give me some advice-many data are merged in the same column in the SPSS file
Thanks
Dr Thambu David S
Professor and Head
Medicine Unit 2
Christian Medical College, Vellore
632004, India
________________________________________
From: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca]
Sent: Thursday, September 12, 2013 10:31 PM
To: epidata-list(a)lists.umanitoba.ca
Subject: EpiData-list Digest, Vol 119, Issue 8
Send EpiData-list mailing list submissions to
epidata-list(a)lists.umanitoba.ca
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
or, via email, send a message with subject or body 'help' to
epidata-list-request(a)lists.umanitoba.ca
You can reach the person managing the list at
epidata-list-owner(a)lists.umanitoba.ca
When replying, please edit your Subject line so it is more specific
than "Re: Contents of EpiData-list digest..."
EpiData-list mailing list
___________________________________
Today's Topics:
1. Select Field for Validation (epidata-list(a)lists.umanitoba.ca)
2. Automatic Unique Identifier and Double Entry Verification
Mode (epidata-list(a)lists.umanitoba.ca)
----------------------------------------------------------------------
Message: 1
Date: Thu, 12 Sep 2013 10:36:38 +0300
From: epidata-list(a)lists.umanitoba.ca
Subject: [EpiData-list] Select Field for Validation
To: epidata-list(a)lists.umanitoba.ca
Message-ID:
<CAJ=nXPa0C5oQjNGx452y9XqwDt8pDumOXQDAEZSEkNvg976Oyw(a)mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Dear Jammie,
I tried copying a pair but it required re-arraging the check file. I
thought there was another way out.
Thank you!
Kizito.
------------------------------
Message: 2
Date: Thu, 12 Sep 2013 10:48:29 +0300
From: epidata-list(a)lists.umanitoba.ca
Subject: [EpiData-list] Automatic Unique Identifier and Double Entry
Verification Mode
To: epidata-list(a)lists.umanitoba.ca
Message-ID:
<CAJ=nXPa9Z3xudowxWRSG5tTBxkhcrQryZt-w0=6LbPuUGAMAaQ(a)mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Dear Listers,
I wanted to do data validation using the Double Entry Verification mode,
but when I used an automatically generated unique identifiers for the
records it could not prompt even when there was discordance.
What is the solution?
Kizito
On 10 September 2013 23:25, <epidata-list-request(a)lists.umanitoba.ca> wrote:
> Send EpiData-list mailing list submissions to
> epidata-list(a)lists.umanitoba.ca
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> or, via email, send a message with subject or body 'help' to
> epidata-list-request(a)lists.umanitoba.ca
>
> You can reach the person managing the list at
> epidata-list-owner(a)lists.umanitoba.ca
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of EpiData-list digest..."
>
>
> EpiData-list mailing list
> ___________________________________
>
> Today's Topics:
>
> 1. EpiC data export fails on STATA8 option
> (epidata-list(a)lists.umanitoba.ca)
> 2. Re: EpiC data export fails on STATA8 option
> (epidata-list(a)lists.umanitoba.ca)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 9 Sep 2013 16:30:06 +0000
> From: epidata-list(a)lists.umanitoba.ca
> Subject: [EpiData-list] EpiC data export fails on STATA8 option
> To: "'epidata-list(a)lists.umanitoba.ca'"
> <epidata-list(a)lists.umanitoba.ca>
> Message-ID:
> <3C0AEE4CAF2E224B99497B5018BED09703D91D(a)mx02.ispm.unibe.ch>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear listers,
>
> I'm trying to convert EpiData files to Stata format. I've stumbled upon a
> problem similar to the one described by Jan in a post from 2008:
>
> http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html
>
> (This is the only reference I've been able to find on the list and Google)
>
> My command and output are as follows:
>
> -------------------------------
> C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE
>
> EpiC - the EpiData command application version 3.1.2 14. Nov. 2006
> (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk
> Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus
>
> 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F.
> Access violation at address 00461B3F in module 'EpiC.exe'. Write of
> address 022AC000.
> -------------------------------
>
> The files are converted correctly when I use "STATA" option, but since it
> converts to Stata 6 version I don't get the correct variable names whenever
> they are too long. I've tested it on two machines: one running Windows
> Server 2008, and one on Linux (using Wine). The files are converted
> correctly using EpiData 3.1 GUI.
>
> Are there any solutions to this problem?
>
> Thanks a lot for help,
> radek
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 09 Sep 2013 23:17:36 +0200
> From: epidata-list(a)lists.umanitoba.ca
> Subject: Re: [EpiData-list] EpiC data export fails on STATA8 option
> To: epidata-list(a)lists.umanitoba.ca
> Message-ID: <522E3AF0.7040303(a)epidata.dk>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> The EpiC command system from 2006 will not be fixed, but we will
> consider developing a similar command line tool with the new system
> functionality (epx).
>
> In other words - until this is done you have to do the process
> repeatedly with the new software, which handles all new versions of
> Stata (at least until v12)
>
> The template parser could be the first part of such a batch/cmd stand
> alone tool.'
>
> Regards
> Jens Lauritsen
> EpiData Association
> On 09/09/2013 06:30 PM, epidata-list(a)lists.umanitoba.ca wrote:
> > Dear listers,
> >
> > I'm trying to convert EpiData files to Stata format. I've stumbled upon
> a problem similar to the one described by Jan in a post from 2008:
> >
> > http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html
> >
> > (This is the only reference I've been able to find on the list and
> Google)
> >
> > My command and output are as follows:
> >
> > -------------------------------
> > C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE
> >
> > EpiC - the EpiData command application version 3.1.2 14. Nov. 2006
> > (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk
> > Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus
> >
> > 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F.
> > Access violation at address 00461B3F in module 'EpiC.exe'. Write of
> address 022AC000.
> > -------------------------------
> >
> > The files are converted correctly when I use "STATA" option, but since
> it converts to Stata 6 version I don't get the correct variable names
> whenever they are too long. I've tested it on two machines: one running
> Windows Server 2008, and one on Linux (using Wine). The files are converted
> correctly using EpiData 3.1 GUI.
> >
> > Are there any solutions to this problem?
> >
> > Thanks a lot for help,
> > radek
> >
> >
> >
> > _______________________________________________
> > EpiData-list mailing list
> > EpiData-list(a)lists.umanitoba.ca
> > http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> >
>
>
>
> ------------------------------
>
> ________________________________________
> EpiData-list(a)lists.umanitoba.ca
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
>
>
> End of EpiData-list Digest, Vol 119, Issue 7
> ********************************************
>
------------------------------
________________________________________
EpiData-list(a)lists.umanitoba.ca
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
End of EpiData-list Digest, Vol 119, Issue 8
********************************************
Does EpiData Entry have software to download to a MAC using OS X software?
with interest,
Ralph
--
Ralph V. Katz, DMD, MPH, PhD
Professor
Department of Epidemiology & Health Promotion
NYU College of Dentistry
phone: (212) 998-9550
FAX: (212) 995-4436
email: ralph.katz(a)nyu.edu
Mailing address: 250 Park Ave South,
NY, NY 10003-1402
(mailing code: 9479)
Office location: Rm 636, 6th Floor
250 Park Ave South
(btw 19th & 20th St)
Dear Listers,
I wanted to do data validation using the Double Entry Verification mode,
but when I used an automatically generated unique identifiers for the
records it could not prompt even when there was discordance.
What is the solution?
Kizito
On 10 September 2013 23:25, <epidata-list-request(a)lists.umanitoba.ca> wrote:
> Send EpiData-list mailing list submissions to
> epidata-list(a)lists.umanitoba.ca
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> or, via email, send a message with subject or body 'help' to
> epidata-list-request(a)lists.umanitoba.ca
>
> You can reach the person managing the list at
> epidata-list-owner(a)lists.umanitoba.ca
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of EpiData-list digest..."
>
>
> EpiData-list mailing list
> ___________________________________
>
> Today's Topics:
>
> 1. EpiC data export fails on STATA8 option
> (epidata-list(a)lists.umanitoba.ca)
> 2. Re: EpiC data export fails on STATA8 option
> (epidata-list(a)lists.umanitoba.ca)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 9 Sep 2013 16:30:06 +0000
> From: epidata-list(a)lists.umanitoba.ca
> Subject: [EpiData-list] EpiC data export fails on STATA8 option
> To: "'epidata-list(a)lists.umanitoba.ca'"
> <epidata-list(a)lists.umanitoba.ca>
> Message-ID:
> <3C0AEE4CAF2E224B99497B5018BED09703D91D(a)mx02.ispm.unibe.ch>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear listers,
>
> I'm trying to convert EpiData files to Stata format. I've stumbled upon a
> problem similar to the one described by Jan in a post from 2008:
>
> http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html
>
> (This is the only reference I've been able to find on the list and Google)
>
> My command and output are as follows:
>
> -------------------------------
> C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE
>
> EpiC - the EpiData command application version 3.1.2 14. Nov. 2006
> (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk
> Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus
>
> 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F.
> Access violation at address 00461B3F in module 'EpiC.exe'. Write of
> address 022AC000.
> -------------------------------
>
> The files are converted correctly when I use "STATA" option, but since it
> converts to Stata 6 version I don't get the correct variable names whenever
> they are too long. I've tested it on two machines: one running Windows
> Server 2008, and one on Linux (using Wine). The files are converted
> correctly using EpiData 3.1 GUI.
>
> Are there any solutions to this problem?
>
> Thanks a lot for help,
> radek
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 09 Sep 2013 23:17:36 +0200
> From: epidata-list(a)lists.umanitoba.ca
> Subject: Re: [EpiData-list] EpiC data export fails on STATA8 option
> To: epidata-list(a)lists.umanitoba.ca
> Message-ID: <522E3AF0.7040303(a)epidata.dk>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> The EpiC command system from 2006 will not be fixed, but we will
> consider developing a similar command line tool with the new system
> functionality (epx).
>
> In other words - until this is done you have to do the process
> repeatedly with the new software, which handles all new versions of
> Stata (at least until v12)
>
> The template parser could be the first part of such a batch/cmd stand
> alone tool.'
>
> Regards
> Jens Lauritsen
> EpiData Association
> On 09/09/2013 06:30 PM, epidata-list(a)lists.umanitoba.ca wrote:
> > Dear listers,
> >
> > I'm trying to convert EpiData files to Stata format. I've stumbled upon
> a problem similar to the one described by Jan in a post from 2008:
> >
> > http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html
> >
> > (This is the only reference I've been able to find on the list and
> Google)
> >
> > My command and output are as follows:
> >
> > -------------------------------
> > C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE
> >
> > EpiC - the EpiData command application version 3.1.2 14. Nov. 2006
> > (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk
> > Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus
> >
> > 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F.
> > Access violation at address 00461B3F in module 'EpiC.exe'. Write of
> address 022AC000.
> > -------------------------------
> >
> > The files are converted correctly when I use "STATA" option, but since
> it converts to Stata 6 version I don't get the correct variable names
> whenever they are too long. I've tested it on two machines: one running
> Windows Server 2008, and one on Linux (using Wine). The files are converted
> correctly using EpiData 3.1 GUI.
> >
> > Are there any solutions to this problem?
> >
> > Thanks a lot for help,
> > radek
> >
> >
> >
> > _______________________________________________
> > EpiData-list mailing list
> > EpiData-list(a)lists.umanitoba.ca
> > http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> >
>
>
>
> ------------------------------
>
> ________________________________________
> EpiData-list(a)lists.umanitoba.ca
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
>
>
> End of EpiData-list Digest, Vol 119, Issue 7
> ********************************************
>
Dear listers,
I'm trying to convert EpiData files to Stata format. I've stumbled upon a problem similar to the one described by Jan in a post from 2008:
http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html
(This is the only reference I've been able to find on the list and Google)
My command and output are as follows:
-------------------------------
C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE
EpiC - the EpiData command application version 3.1.2 14. Nov. 2006
(C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk
Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus
0 % doneException EAccessViolation in module EpiC.exe at 00061B3F.
Access violation at address 00461B3F in module 'EpiC.exe'. Write of address 022AC000.
-------------------------------
The files are converted correctly when I use "STATA" option, but since it converts to Stata 6 version I don't get the correct variable names whenever they are too long. I've tested it on two machines: one running Windows Server 2008, and one on Linux (using Wine). The files are converted correctly using EpiData 3.1 GUI.
Are there any solutions to this problem?
Thanks a lot for help,
radek
Dear members of theEpiData-Mailing list,
I do my first steps with EpiData so please be tolerant with my
disability. I just made some data entry when I recognized that I forgot
to write down a variable in the qes-file.
My way to handle the problem is to write a new qes-file than a new
rec-file and start the data entry again from the beginning. But this
can't be the accurate way, right? In your help-area I saw this hint
here, but I really don't know how to find "Analysis" and I don't know,
whether I can use this hint for my problem...
/Richard, //
//You can use Analysis to merge the files. It's easy to do manually: //
////
//cd c:\directory with the files //
//read file1 //
//append file2 //
//append file3 //
//* etc //
//savedata mergefile //
//close //
////
//If your file names are always the same, you can put those commands into //
//a .pgm file to do this. //
///
It would be very great if you can answer me my question, thank you very
much in advance! Some of my colleagues said that I can combine several
rec-files by exporting them to SPSS and than copy and paste the content
- I hope you can recommend me an easier way!
Greeting from Germany,
Lea Dipper
--
Dipl.-Psych. Lea Dipper
Fakultät für Ingenieurwissenschaften und Informatik
Institut für Psychologie und Pädagogik
Abteilung Entwicklungspsychologie
Albert-Einstein-Allee 47
Raum 47.0.423
Telefon: 0731/50 31726
Fax: 0731/50 23072
Universität Ulm
Dear All
I am unable to export data created in epidata manager to SPSS
In the SPSS data file created,many variables get compressed into 1 variable, for example 2 or 3 nearby varaibles are all shown in the same column in SPSS
However, the variable view of the same file it appears that all variables, variable labels and codes are seperate???
Perhaps i am making some elemenary error in the way i am doing things-if anyone has experienced this/could help me i would be much obliged
Thanks
Thambu
Dr Thambu David S
Professor and Head
Medicine Unit 2
Christian Medical College, Vellore
632004, India
________________________________________
From: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca]
Sent: Wednesday, September 04, 2013 10:32 PM
To: epidata-list(a)lists.umanitoba.ca
Subject: EpiData-list Digest, Vol 119, Issue 2
Send EpiData-list mailing list submissions to
epidata-list(a)lists.umanitoba.ca
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
or, via email, send a message with subject or body 'help' to
epidata-list-request(a)lists.umanitoba.ca
You can reach the person managing the list at
epidata-list-owner(a)lists.umanitoba.ca
When replying, please edit your Subject line so it is more specific
than "Re: Contents of EpiData-list digest..."
EpiData-list mailing list
___________________________________
Today's Topics:
1. RE: Epidatamanager to PSPP or SPSS issues
(epidata-list(a)lists.umanitoba.ca)
----------------------------------------------------------------------
Message: 1
Date: Wed, 4 Sep 2013 12:32:05 +0530
From: epidata-list(a)lists.umanitoba.ca
Subject: [EpiData-list] RE: Epidatamanager to PSPP or SPSS issues
To: "epidata-list(a)lists.umanitoba.ca"
<epidata-list(a)lists.umanitoba.ca>
Message-ID:
<063C35AE5474CE4B93D2EAEF476684FB024E8210F157(a)mail.cmcvellore.ac.in>
Content-Type: text/plain; charset="us-ascii"
Dear Jens
When i use epidata manager and export the data to SPSS i face a problem.
In the SPSS datafile created, 2 or 3 variables get combined into 1 variable in the data for example the age , sex all are in one column;however in the same file if i look at the variable view,i see all data separately with the value labels separate and the codes separately.
I contacted PSPP user group online and they suggested that this could be an issue with the epidata manager
I hope you can help
Thanks
Thambu
much obliged
Thambu
------------------------------
________________________________________
EpiData-list(a)lists.umanitoba.ca
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
End of EpiData-list Digest, Vol 119, Issue 2
********************************************
Dear Listers,
I wish to validate two files but leave out one field which obviuosly has
different entries since they identify the Data Entrants. How do I leave out
a field from the validation process?
Kizito.
On 5 September 2013 20:02, <epidata-list-request(a)lists.umanitoba.ca> wrote:
> Send EpiData-list mailing list submissions to
> epidata-list(a)lists.umanitoba.ca
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
> or, via email, send a message with subject or body 'help' to
> epidata-list-request(a)lists.umanitoba.ca
>
> You can reach the person managing the list at
> epidata-list-owner(a)lists.umanitoba.ca
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of EpiData-list digest..."
>
>
> EpiData-list mailing list
> ___________________________________
>
> Today's Topics:
>
> 1. epidatamanager: control-file-has-bad-permissions
> (epidata-list(a)lists.umanitoba.ca)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 05 Sep 2013 11:26:53 -0300
> From: epidata-list(a)lists.umanitoba.ca
> Subject: [EpiData-list] epidatamanager:
> control-file-has-bad-permissions
> To: epidata-list(a)lists.umanitoba.ca
> Message-ID: <522894AD.9080406(a)ufba.br>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi
>
> Does anyone know what is this when I try to install epidata manager? I'm
> using Ubuntu 13.04:
>
> Lintian check results for
> /home/mcardeal/Downloads/setup.epidatamanager.1.4.2.0-0_i386.deb:
> E: epidatamanager: control-file-has-bad-permissions postinst 0775 != 0755
>
> This started happening after the last update EpiData (July 2013). While
> reinstalling several times the error message continues.
> Thanks
> Mauricio
> Federal University of Bahia, Brazil
>
>
> ------------------------------
>
> ________________________________________
> EpiData-list(a)lists.umanitoba.ca
> http://lists.umanitoba.ca/mailman/listinfo/epidata-list
>
>
> End of EpiData-list Digest, Vol 119, Issue 3
> ********************************************
>