EpiData-list May 2010

epidata-list@lists.umanitoba.ca

1 participants
7 discussions

SV: EpiData-list Digest, Vol 79, Issue 4

by epidata-list＠lists.umanitoba.ca

Hello, and thank you very much all of you; Jonas, Hans and Zaw Myo Tun for your kindness to give me advice on my question on "How to change the title of en already existing qes- and rec.file without loosing data". I followed the instructions given from Jonas and it worked ! I also did the same with the check.file that belonged to these qes and rec.files and it worked also. Before i changed the title, I added 4 new variables to my qes .fiel and than I followed the instuctions in the Help file and Tools -->Revise DataFile. Best regards Susann Regber ________________________________________ Från: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] för epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca] Skickat: den 28 maj 2010 19:01 Till: epidata-list(a)lists.umanitoba.ca Ämne: EpiData-list Digest, Vol 79, Issue 4 Send EpiData-list mailing list submissions to epidata-list(a)lists.umanitoba.ca To subscribe or unsubscribe via the World Wide Web, visit http://lists.umanitoba.ca/mailman/listinfo/epidata-list or, via email, send a message with subject or body 'help' to epidata-list-request(a)lists.umanitoba.ca You can reach the person managing the list at epidata-list-owner(a)lists.umanitoba.ca When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..." EpiData-list mailing list ___________________________________ Today's Topics: 1. Re: question about changing title of qes fil and rec file (epidata-list(a)lists.umanitoba.ca) 2. Ans: changing title of qes file and rec file (epidata-list(a)lists.umanitoba.ca) ---------------------------------------------------------------------- Message: 1 Date: Thu, 27 May 2010 19:13:07 +0200 From: epidata-list(a)lists.umanitoba.ca Subject: Re: [EpiData-list] question about changing title of qes fil and rec file To: epidata-list(a)lists.umanitoba.ca Message-ID: <4BFEA823.4040509(a)tbrieder.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Dear Susann: "Title", "File Label" or "File name"? Title: Change the title in the QES file, save the file, do not make a REC file, but 4. Enter data, and you will be prompted to adjust the REC file to the new QES file Label: Read the REC file in EpiData analysis, and use the command "labeldata", eg. labeldata "My new label for the data file" File name: Just rename both QES and REC file in Explorer. Regards, Hans On 20:59, epidata-list(a)lists.umanitoba.ca wrote: > Hello > > I would like to change the title of an existing QES- file and REC file- without losing data. Is it possible ? How can I do that ? > > Susann > > Susann Regber > Pediatric nurse, MPH, > PHD-student > Nordic School of Public Health > Tel.: +46 (0)31 69 39 01 > Mobile: +46(0) 738 19 04 19 > E-mail: susann.regber(a)nhv.se > Homepage: www.nhv.se > > P.O. Box 12133, SE-402 42 Gothenburg > > > -- Hans L Rieder, MD, MPH Jetzikofenstr 12 3038 Kirchlindach Switzerland Tel: +41 31 829 4577 Mob: +41 79 321 9122 Web: http://www.tbrieder.org ------------------------------ Message: 2 Date: Fri, 28 May 2010 11:15:08 +0630 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] Ans: changing title of qes file and rec file To: epidata-list(a)lists.umanitoba.ca Message-ID: <AANLkTikwI8k7wSNVeEpM-CPQ6n_kbsl66nVK0YAN1GP5(a)mail.gmail.com> Content-Type: text/plain; charset=windows-1252 Hello, I assume what you mean by "Title in qes and rec file" is what you typed in .qes file from which .rec file was made. If so, you can easily edit the "Title" in qes file as you want. Please be sure that the field names and definitions are not changed. Then, revise the old rec file with the newly edited qes file (by going to Tools --> revise data file). By doing so, your data won't be harmed. best regards, Zaw Myo Tun Zaw Myo Tun | Integrated HIV Care Program International Union Against Tuberculosis and Lung Disease The Union?s office in Myanmar No. 36, 27th street | between 72nd & 73rd streets Chan Aye Thar Zan Township | Mandalay | Myanmar Tel: +95 2 71082 | Fax: +95 2 71082 drzmyotun(a)gmail.com | www.theunion.org On 5/27/10, epidata-list-request(a)lists.umanitoba.ca <epidata-list-request(a)lists.umanitoba.ca> wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. Re: new test release of EpiData Manager available > (epidata-list(a)lists.umanitoba.ca) > 2. question about changing title of qes fil and rec file > (epidata-list(a)lists.umanitoba.ca) > 3. Ang: [EpiData-list] question about changing title of qes fil > and rec file (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 26 May 2010 16:32:16 -0400 > From: epidata-list(a)lists.umanitoba.ca > Subject: Re: [EpiData-list] new test release of EpiData Manager > available > To: epidata-list(a)lists.umanitoba.ca > Message-ID: <BLU0-SMTP93E23D8FE0C4EDD9B68189FDE90(a)phx.gbl> > Content-Type: text/plain; charset=us-ascii > > Sections will be great to have! Everything described works on a Mac. > Placement of sections sometimes fails to open the dialogue box to name the > section, rendering the section as a white box, but not editable. > > Jamie Hockin > > On 2010-05-25, at 6:12 PM, epidata-list(a)lists.umanitoba.ca wrote: > >> The development of the EpiData Manager has now come to a new stage, where >> test versions will be released with shorter intervals. The release will >> happen in these steps: >> a. Test placement of fields in data entry forms. Move fields, add >> sections. Only one form is allowed. Edit variable labels (questions). > > > > ------------------------------ > > Message: 2 > Date: Thu, 27 May 2010 08:28:20 +0000 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] question about changing title of qes fil and > rec file > To: "epidata-list(a)lists.umanitoba.ca" > <epidata-list(a)lists.umanitoba.ca> > Message-ID: <42EF964FD9CDE2479936BC6F837DC80B0827E6A3(a)loke.nhv.se> > Content-Type: text/plain; charset="us-ascii" > > Hello > > I would like to change the title of an existing QES- file and REC file- > without losing data. Is it possible ? How can I do that ? > > Susann > > Susann Regber > Pediatric nurse, MPH, > PHD-student > Nordic School of Public Health > Tel.: +46 (0)31 69 39 01 > Mobile: +46(0) 738 19 04 19 > E-mail: susann.regber(a)nhv.se > Homepage: www.nhv.se > > P.O. Box 12133, SE-402 42 Gothenburg > > > > ------------------------------ > > Message: 3 > Date: Thu, 27 May 2010 12:11:12 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: Ang: [EpiData-list] question about changing title of qes fil > and rec file > To: epidata-list(a)lists.umanitoba.ca > Message-ID: > <OFA31131DD.3F5D22A7-ONC1257730.0037F54B-C1257730.0037F550(a)sll.se> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi > > You can change the name of the ques and rec files directely in the folder > (ie with files closed). It is important that you have exactly identical > names of the qes and rec files. I would recommend that you first make a copy > of the original qes and rec (right-click --> copy. Right-click again --> > paste) files and then change the names of the copies (they will br named > "Copy of yourfile.qes" and "Copy of yourfile.rec" > > Sincerely > > Jonas Malmstedt, MD > Department of Vascular Surgery, N1:06 > Karolinska University Hospital > SE-171 76 Stockholm > +46-(0)8-517 76895 > +46-(0)70-484 1455 > > > > -----epidata-list-bounces(a)lists.umanitoba.ca skrev: ----- > > > Till: "epidata-list(a)lists.umanitoba.ca" <epidata-list(a)lists.umanitoba.ca> > Fr?n: epidata-list(a)lists.umanitoba.ca > S?nt av: epidata-list-bounces(a)lists.umanitoba.ca > Datum: 2010/05/27 10.28 > ?rende: [EpiData-list] question about changing title of qes fil and rec file > > Hello > > I would like to change the title of an existing QES- file and REC file- > without losing data. Is it possible ? How can I do that ? > > Susann > > Susann Regber > Pediatric nurse, MPH, > PHD-student > Nordic School of Public Health > Tel.: +46 (0)31 69 39 01 > Mobile: +46(0) 738 19 04 19 > E-mail: susann.regber(a)nhv.se > Homepage: www.nhv.se > > P.O. Box 12133, SE-402 42 Gothenburg > > _______________________________________________ > EpiData-list mailing list > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 79, Issue 3 > ******************************************* > ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 79, Issue 4 *******************************************

13 years, 10 months

Ans: changing title of qes file and rec file

by epidata-list＠lists.umanitoba.ca

Hello, I assume what you mean by "Title in qes and rec file" is what you typed in .qes file from which .rec file was made. If so, you can easily edit the "Title" in qes file as you want. Please be sure that the field names and definitions are not changed. Then, revise the old rec file with the newly edited qes file (by going to Tools --> revise data file). By doing so, your data won't be harmed. best regards, Zaw Myo Tun Zaw Myo Tun | Integrated HIV Care Program International Union Against Tuberculosis and Lung Disease The Union’s office in Myanmar No. 36, 27th street | between 72nd & 73rd streets Chan Aye Thar Zan Township | Mandalay | Myanmar Tel: +95 2 71082 | Fax: +95 2 71082 drzmyotun(a)gmail.com | www.theunion.org On 5/27/10, epidata-list-request(a)lists.umanitoba.ca <epidata-list-request(a)lists.umanitoba.ca> wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. Re: new test release of EpiData Manager available > (epidata-list(a)lists.umanitoba.ca) > 2. question about changing title of qes fil and rec file > (epidata-list(a)lists.umanitoba.ca) > 3. Ang: [EpiData-list] question about changing title of qes fil > and rec file (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 26 May 2010 16:32:16 -0400 > From: epidata-list(a)lists.umanitoba.ca > Subject: Re: [EpiData-list] new test release of EpiData Manager > available > To: epidata-list(a)lists.umanitoba.ca > Message-ID: <BLU0-SMTP93E23D8FE0C4EDD9B68189FDE90(a)phx.gbl> > Content-Type: text/plain; charset=us-ascii > > Sections will be great to have! Everything described works on a Mac. > Placement of sections sometimes fails to open the dialogue box to name the > section, rendering the section as a white box, but not editable. > > Jamie Hockin > > On 2010-05-25, at 6:12 PM, epidata-list(a)lists.umanitoba.ca wrote: > >> The development of the EpiData Manager has now come to a new stage, where >> test versions will be released with shorter intervals. The release will >> happen in these steps: >> a. Test placement of fields in data entry forms. Move fields, add >> sections. Only one form is allowed. Edit variable labels (questions). > > > > ------------------------------ > > Message: 2 > Date: Thu, 27 May 2010 08:28:20 +0000 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] question about changing title of qes fil and > rec file > To: "epidata-list(a)lists.umanitoba.ca" > <epidata-list(a)lists.umanitoba.ca> > Message-ID: <42EF964FD9CDE2479936BC6F837DC80B0827E6A3(a)loke.nhv.se> > Content-Type: text/plain; charset="us-ascii" > > Hello > > I would like to change the title of an existing QES- file and REC file- > without losing data. Is it possible ? How can I do that ? > > Susann > > Susann Regber > Pediatric nurse, MPH, > PHD-student > Nordic School of Public Health > Tel.: +46 (0)31 69 39 01 > Mobile: +46(0) 738 19 04 19 > E-mail: susann.regber(a)nhv.se > Homepage: www.nhv.se > > P.O. Box 12133, SE-402 42 Gothenburg > > > > ------------------------------ > > Message: 3 > Date: Thu, 27 May 2010 12:11:12 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: Ang: [EpiData-list] question about changing title of qes fil > and rec file > To: epidata-list(a)lists.umanitoba.ca > Message-ID: > <OFA31131DD.3F5D22A7-ONC1257730.0037F54B-C1257730.0037F550(a)sll.se> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi > > You can change the name of the ques and rec files directely in the folder > (ie with files closed). It is important that you have exactly identical > names of the qes and rec files. I would recommend that you first make a copy > of the original qes and rec (right-click --> copy. Right-click again --> > paste) files and then change the names of the copies (they will br named > "Copy of yourfile.qes" and "Copy of yourfile.rec" > > Sincerely > > Jonas Malmstedt, MD > Department of Vascular Surgery, N1:06 > Karolinska University Hospital > SE-171 76 Stockholm > +46-(0)8-517 76895 > +46-(0)70-484 1455 > > > > -----epidata-list-bounces(a)lists.umanitoba.ca skrev: ----- > > > Till: "epidata-list(a)lists.umanitoba.ca" <epidata-list(a)lists.umanitoba.ca> > Från: epidata-list(a)lists.umanitoba.ca > Sänt av: epidata-list-bounces(a)lists.umanitoba.ca > Datum: 2010/05/27 10.28 > Ärende: [EpiData-list] question about changing title of qes fil and rec file > > Hello > > I would like to change the title of an existing QES- file and REC file- > without losing data. Is it possible ? How can I do that ? > > Susann > > Susann Regber > Pediatric nurse, MPH, > PHD-student > Nordic School of Public Health > Tel.: +46 (0)31 69 39 01 > Mobile: +46(0) 738 19 04 19 > E-mail: susann.regber(a)nhv.se > Homepage: www.nhv.se > > P.O. Box 12133, SE-402 42 Gothenburg > > _______________________________________________ > EpiData-list mailing list > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 79, Issue 3 > ******************************************* >

13 years, 11 months

question about changing title of qes fil and rec file

by epidata-list＠lists.umanitoba.ca

Hello I would like to change the title of an existing QES- file and REC file- without losing data. Is it possible ? How can I do that ? Susann Susann Regber Pediatric nurse, MPH, PHD-student Nordic School of Public Health Tel.: +46 (0)31 69 39 01 Mobile: +46(0) 738 19 04 19 E-mail: susann.regber(a)nhv.se Homepage: www.nhv.se P.O. Box 12133, SE-402 42 Gothenburg

13 years, 11 months

new test release of EpiData Manager available

by epidata-list＠lists.umanitoba.ca

Dear All Due to funding received (and more expected) the development phase has been lengthened to summer 2011 allowing for the continuation of T.Christiansen to work fulltime on the restructuring. All programming is now done in Freepascal and Lazarus. The development of the EpiData Manager has now come to a new stage, where test versions will be released with shorter intervals. The release will happen in these steps: a. Test placement of fields in data entry forms. Move fields, add sections. Only one form is allowed. Edit variable labels (questions). b. Include previous data structures on a form. Will import rec files and dta (stata) files. c. Write data files and export data structures to rec file and dta files d. Start development of a dedicated entry client. e. Add definition and editing of category labels (value labels). f. Add to data forms the possibility of translating labels and questions If all goes well points a-f will be ready within the next few months. After this a new planning sequence will include relational aspects and multi entry forms of the same project, user access control and other coming aspects. The first new release mentioned above (a) was released earlier today from http://www.epidata.dk/testing.php for the operating systems Linux, Mac and Windows. It will seem as a backstep in relation to the previous test version, but we are approaching the same level with a completely new final XML data file structure. The new structure will accomodate all we would like and will be visible in the next stage (b), where users can see the xml structure. ---------------------------------------------------------------------- This first release is covering what happens in the definition of a single data form. Including the addition of new fields, new sections and heading lines. A section is a sub-division of a single data entry form. A section has NOT been used previously in EpiData software and contains a number of fields. Jumps will allow jumps between sections and user access control will be at the section level. When you first start the application you will see two sections, which can be moved, edited and deleted. Jens Lauritsen EpiData Association

13 years, 11 months

EpiData Manager v0.5

by epidata-list＠lists.umanitoba.ca

Good to see progress with the Manager. I have some questions and thought that this would be the appropriate forum rather than the flyspray bug reporting system. At present, is the string variable created equivalent to the variable created in Entry with the underscore? If so, will uppercase strings be supported? Is it possible to resize the section box after its creation other than through the advanced tab and changing the numbers therein? Is it possible to copy and paste fields with a view to subsequent amendment of field names? This is important with a view to rapid data-form creation. I've done a test and it seems to work. I'll post a query on flyspray with regards to opening the Help file within the Manager which I can't do. Regards, Neville ----------------------------------------- ************************************************************************** The information contained in the EMail and any attachments is confidential and intended solely and for the attention and use of the named addressee(s). It may not be disclosed to any other person without the express authority of the HPA, or the intended recipient, or both. If you are not the intended recipient, you must not disclose, copy, distribute or retain this message or any part of it. This footnote also confirms that this EMail has been swept for computer viruses, but please re-sweep any attachments before opening or saving. HTTP://www.HPA.org.uk **************************************************************************

13 years, 11 months

Introduction document and help in the new Manager

by epidata-list＠lists.umanitoba.ca

The manager contains a "help" menu. On this two entries are found. : 1 short introduction 2 show shortcuts The first one (introduction) will check first if the file "epidatamanagerintro.pdf" is present in the location on your computer, where you stored the manager exe file. If so the file is opened in the local pdf reader. If not present the standard internet browser will open the document: http://epidata.dk/downloads/epidatamanagerintro.pdf If you then save the file in the same folder as the exe file, the local copy will be opened thereafter. 2 show shortcuts This will open the "wiki" documentation system directly via internet. If you have no current internet connection an error will appear in your browser. regards Jens Lauritsen EpiData Association

13 years, 11 months

Few Clarifications about New Epidata Manager Developments

by epidata-list＠lists.umanitoba.ca

Dear Jens, It is heartening to hear that further developments of Epidata are going on. I just have few points (apprehensions) which I want to share with you. The ability to correct the data file by a text editor (in new system) sounds wonderful but existing system is also good. 1. Will the new system continue support the already developed relation databases in Epidata Entry ? Will it be downward compatible with the relational databases systems already working well in Epidata Entry 3.1 and Analysis 2.3 ? 2. The QES, CHK, REC file system was comparatively simple and one could change it whenever wanted, without being a software professional (programmer). With regards, Dr. Shavinder Singh

13 years, 11 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

EpiData-list May 2010