Dear all, I did a small test with a few variables to test the new program
2.0.
This are my comments.
Is clear that the visual result can be modified more easily, but in the 3.1
version is possible to make some changes to help improve the data load.
The ease of incorporating commands from the contextual menu is also really
important.
Another positive aspect is the impossibility of data entry to modify the
program load (which is possible in version 3.1)
Now I’ll discuss the negatives:
1. I couldn't export an easy project to spss. I get error messages and of
course does not generate the corresponding database.
2. when generating the value labels I found that the 3.1 was easier because
I could cut and paste and then give properly. In the new program must copy
and paste each of the categories slowing the process.
3. The check file is missing. Except jumps to other questions you can't (at
least I didn't understand how) to use the very useful ‘if then end if’,
‘hide’, etc. etc. It will be possible to use these tools in the future? If
not, I think version 3.1 will remain well above the new 2.0
I Take this opportunity to thank you, the program EpiData 3.1 has been
(and still is) a very useful tool.
For example right now we are putting in place a loading program for a study
of climate and school violence (from the ministry of education) to about
20,000 cases. The program does not disappoint EVER. So thank you very much
for yours efforts.
Sorry for my poor English, bellow you will find my comments in spanish
Mg. Luis D'Angelo - Ministerio de Justicia y Derechos Humanos - Argentina
Estimados, he hecho una pequeña prueba con unas pocas variables para probar
el nuevo programa 2.0.
Van mis comentarios al respecto.
Como positivo es claro que el resultado visual puede ser modificado con
mayor facilidad, aunque en la versión 3.1 también es posible hacer algunas
modificaciones que ayudan a mejorar la carga de datos.
La facilidad de incorporar los comandos a partir del menú contextual es
también algo realmente importante.
Otro aspecto positivo a destacar es la imposibilidad del data entry de
modificar el programa de carga (cosa que sí es posible en la versión 3.1)
Ahora van las críticas
1. no pude exportar un archivo muy sencillo al spss. Me da mensajes de
error y por supuesto no genera la base de datos correspondiente.
2. al momento de generar los value labels encontré que el 3.1 era más
sencillo porque podía cortar y pegar y luego darle forma adecuada. En el
nuevo programa se debe copiar y pegar cada una de las categorías haciendo
más lento el proceso.
3. El archivo check se echa de menos. Salvo los saltos a otras preguntas no
se puede (al menos yo no he comprendido cómo) utilizar el muy útil 'if then
end if', el comando 'hide', etc. Va a ser posible utilizar estas
herramientas en el futuro? Si no es así pienso que la versión 3.1 va a
continuar siendo muy superior a la nueva 2.0
Aprovecho para agradecer el programa epidata 3.1 que ha sido (y sigue
siendo) una herramienta de gran utilidad.
Por ejemplo en estos momentos estamos poniendo a punto un programa de carga
para un estudio de clima y violencia en la escuela (desde el ministerio de
educación) para alrededor de 20.000 casos. El programa no decepciona NUNCA.
De modo que muchas gracias por los esfuerzos realizados.
Mg. Luis D'Angelo - Ministerio de Justicia y Derechos Humanos - Argentina
Dear All
Today we have placed v2.0 for general download on Http://www.epidata.dk/download.php
We hope that the users regard this release as a major step forward in securing prime data quality for all projects be they small and simple or complex.
The main changes since last release in June 2014 are:
Creation of Relational databases - that is multiple dataforms within a project.
Graphical re-design of interface and icons
Backup file principle now places backups in a sub-folder to the epx data file
Securing function at all levels in view of reported bugs and problems
Version control at start of software against what is current version.
More news will come later, but please do advice users to make sure that all is well functioning. As with other software one should also secure backups before starting to use a new version.
As users of this list you will know that very much work went into securing functionality, removing bugs and finding suitable design for the new aspects. Should you find problems or unexpected closures do report to the bug system or here on the list.
The only functionality not implemented in the EPX file based new versions and therefore only available in EpiData Classic is scripting, e.g. calculation of complex summary scores following entry. This will come later after we have developed restricted user access and possibly GCP compliancy.
During the following days we will focus on updating the website - "recent changes lists" and similar aspects.
We are aware that some functions and ways of working are not fully documented on the website, wiki or in the pdf introduction documents. But these will follow.
Comments and reports on experiences with the new versions are highly welcomed on the list.
regards
Torsten Bonde Christiansen
Jens Lauritsen
EpiData Association, Denmark
Hello all:
This appears to have been addressed back in 2013 for v1.4.2, but nothing
from that discussion is working.
I have downloaded EpiData Entry Client on my Mac (intel), but it does not
work. No matter which download method--zip versus dmg--the client opens,
but does absolutely nothing. I cannot open any of the .epx files, can't
actually quit, etc.
There were some terminal and script workarounds in the 2013 discussion.
These also do not work. What is going on?
_______________________________________________________________
Mark G Shrime, MD MPH FACS
Harvard Interfaculty Initiative in Health Policy
Clinical Instructor, Harvard Medical School
shrime(a)gmail.com
scholar.harvard.edu/shrimehsph.harvard.edu/mark-shrime/
Keep me away from the wisdom which does not cry, the
philosophy which does not laugh, and the greatness
which does not bow before children. —Kahlil Gibran
With purity and with holiness I will pass my life and
practice my art. —Hippocrates
Thank you for the new version of the EpiData Analysis software.
Unfortunately, the available zipped version is only the setup.exe file which has been zipped, so there is no readme file.
For those without administrator rights, the setup file is not useful. Could you please upload a zipped version which can be used by those of us
without administrator rights.
Many thanks, Neville
**************************************************************************
The information contained in the EMail and any attachments is confidential and intended solely and for the attention and use of the named addressee(s). It may not be disclosed to any other person without the express authority of Public Health England, or the intended recipient, or both. If you are not the intended recipient, you must not disclose, copy, distribute or retain this message or any part of it. This footnote also confirms that this EMail has been swept for computer viruses by Symantec.Cloud, but please re-sweep any attachments before opening or saving. http://www.gov.uk/PHE
**************************************************************************
Thanks Torsten, for updating the test version as I was facing the same issue. I have just tried to use it and I have created a small relational project in it. I am able to enter the data in it via Entry Client but unable to reopen the project file in EpiData Manager. Following error occurs while opening the project:
Unable to open the file:
C:\Users\...\MyProject.epx
ERROR: A required XML attribute was not found.
The tag
#document->EpiData->DataFiles->DataFile(dataform_1) expected an attribute with the name "afterRecordState"!
I am using the following version of EpiData Manager:
Program Version: 2.0.23[RC3] r1078
Core version: 2.0.0.0 r1103
FPC version: 2.6.4
Plateform: i386-Win32
Please suggest me, if I am making a mistake or not doing it proper way.
Thanks & best regards,
Rasool Bux
Manager, Information Services,
Aga Khan University,
Stadium Road, Karachi.
Pakistan
-----Original Message-----
From: epidata-list-bounces(a)lists.umanitoba.ca [mailto:epidata-list-bounces@lists.umanitoba.ca] On Behalf Of epidata-list(a)lists.umanitoba.ca
Sent: Thursday, January 15, 2015 6:27 PM
To: epidata-list(a)lists.umanitoba.ca
Subject: [EpiData-list] Updated testversion of EpiData Manager v2.0 RC3
Dear List.
Due to an error in building the test version of EpiData Manager v2.0 RC3, the version intended for Windows (32-bit, standard) edition could not create related datastructures.
Today we have updated the installation on the testing webpage (here
<http://epidata.dk/testing.php>) with a new version (2.0.0.23 RC3).
We encourage all to test this new version and report any errors back on the mailing list or on the bugtracker <http://www.epidata.info/flyspray/>.
Kind regards,
Torsten Bonde Christiansen.
EpiData Association.
_______________________________________________
EpiData-list mailing list
EpiData-list(a)lists.umanitoba.ca
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
________________________________
This e-mail may contain information that is privileged or confidential. If you are not the intended recipient, please delete the e-mail and any attachments and notify us immediately.
Hi List.
Since EpiData Manager and EntryClient have reached the public testing
stage, EpiData Analysis have been
updated to support the new EPX file format (v3) as well as the format
used by Manager & EntryClient v1.4.
With the test release of Manager & EntryClient v2.0 we started
supporting multiple dataforms/datasets. However
EpiData Analysis only supports one dataset and therefor when loading
files made with Manager v2.0 only
the first dataform/dataset will be loaded.
If you wish to load any other dataforms than the first, you should use
the "Export" tool in EpiData Manager
where you can select the dataform you wish to load in Analysis, and
export it to a new EPX file.
The new version of EpiData Analysis (v. 2.2.2.183) is available from our
normal download webpage:
http://epidata.dk/download.php
Kind regards,
Torsten Bonde Christiansen
EpiData Association.
Dear List.
Due to an error in building the test version of EpiData Manager v2.0
RC3, the version intended for Windows (32-bit, standard)
edition could not create related datastructures.
Today we have updated the installation on the testing webpage (here
<http://epidata.dk/testing.php>) with a new version (2.0.0.23 RC3).
We encourage all to test this new version and report any errors back on
the mailing list or on the bugtracker <http://www.epidata.info/flyspray/>.
Kind regards,
Torsten Bonde Christiansen.
EpiData Association.
Dear Jens
Fabulous work
I do hope that we can get you to do some podcasts of basic and advanced functions of Epidata manager!
Thank you
Sincerely
Thambu
Dr Thambu David Sudarsanam MD, DipNB
Professor and Head
Medicine Unit 2 and Clinical Epidemiology Unit
Christian Medical College, Vellore
632004, India
CONFIDENTIALITY NOTICE: This email contains information from the sender that may be CONFIDENTIAL, LEGALLY PRIVILEGED, PROPRIETARY or otherwise protected from disclosure. This email is intended for use only by the person or entity to whom it is addressed. If you are not the intended recipient, any use, disclosure, copying, distribution, printing, or any action taken in reliance on the contents of this email, is strictly prohibited. If you received this email in error, please contact the sending party by reply email, delete the email from your computer system and shred any paper copies.
________________________________________
From: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca]
Sent: Tuesday, January 13, 2015 11:30 PM
To: epidata-list(a)lists.umanitoba.ca
Subject: EpiData-list Digest, Vol 134, Issue 5
Send EpiData-list mailing list submissions to
epidata-list(a)lists.umanitoba.ca
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
or, via email, send a message with subject or body 'help' to
epidata-list-request(a)lists.umanitoba.ca
You can reach the person managing the list at
epidata-list-owner(a)lists.umanitoba.ca
When replying, please edit your Subject line so it is more specific
than "Re: Contents of EpiData-list digest..."
EpiData-list mailing list
___________________________________
Today's Topics:
1. RE: EpiData-list Digest, Vol 133, Issue 2
(epidata-list(a)lists.umanitoba.ca)
----------------------------------------------------------------------
Message: 1
Date: Mon, 12 Jan 2015 23:16:03 +0000
From: epidata-list(a)lists.umanitoba.ca
Subject: [EpiData-list] RE: EpiData-list Digest, Vol 133, Issue 2
To: "'epidata-list(a)lists.umanitoba.ca'"
<epidata-list(a)lists.umanitoba.ca>
Message-ID:
<8E2983B7618DB64E98E570D92FB07DF58C71FF66(a)HV0NTEML01.AD.CCDHB.HEALTH.NZ>
Content-Type: text/plain; charset="us-ascii"
Thanks Jens - this is very good news. Looking forward to seeing the instruction manual.
Best wishes
Christine
-----Original Message-----
From: epidata-list-bounces(a)lists.umanitoba.ca [mailto:epidata-list-bounces@lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca
Sent: Wednesday, 24 December 2014 7:01 a.m.
To: epidata-list(a)lists.umanitoba.ca
Subject: EpiData-list Digest, Vol 133, Issue 2
Send EpiData-list mailing list submissions to
epidata-list(a)lists.umanitoba.ca
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
or, via email, send a message with subject or body 'help' to
epidata-list-request(a)lists.umanitoba.ca
You can reach the person managing the list at
epidata-list-owner(a)lists.umanitoba.ca
When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..."
______________________________________________________________________________
The information contained in this email and any attachments is confidential
and may be legally privileged. If you have received this message in error,
please notify the sender immediately and remove all copies of the message,
including any attachments.
Any views or opinions expressed in this email (unless otherwise stated) may
not represent those of Hutt Valley DHB. Thank you.
______________________________________________________________________________
------------------------------
________________________________________
EpiData-list(a)lists.umanitoba.ca
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
End of EpiData-list Digest, Vol 134, Issue 5
********************************************
Thanks Jens - this is very good news. Looking forward to seeing the instruction manual.
Best wishes
Christine
-----Original Message-----
From: epidata-list-bounces(a)lists.umanitoba.ca [mailto:epidata-list-bounces@lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca
Sent: Wednesday, 24 December 2014 7:01 a.m.
To: epidata-list(a)lists.umanitoba.ca
Subject: EpiData-list Digest, Vol 133, Issue 2
Send EpiData-list mailing list submissions to
epidata-list(a)lists.umanitoba.ca
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.umanitoba.ca/mailman/listinfo/epidata-list
or, via email, send a message with subject or body 'help' to
epidata-list-request(a)lists.umanitoba.ca
You can reach the person managing the list at
epidata-list-owner(a)lists.umanitoba.ca
When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..."
______________________________________________________________________________
The information contained in this email and any attachments is confidential
and may be legally privileged. If you have received this message in error,
please notify the sender immediately and remove all copies of the message,
including any attachments.
Any views or opinions expressed in this email (unless otherwise stated) may
not represent those of Hutt Valley DHB. Thank you.
______________________________________________________________________________
Dear All
It is now about 2 weeks since we copied the pre-release versions of
EpiData Manager and Epidata EntryClient to the testing page for download.
It seems that no major problems have been identified - since we have
received no reports of such errors.
We are just now building an in-house test schedule, which will allow us
to do a structured test of the functionality and aspects of the software
before public release. All the way from defining a project, to exporting
data. Once the routines are ready they will be laid out for public
download. Such routines are a requirement for meeting GCP (Good Clinical
Practice guidelines) standards, which are at the core of the next
release cycle following current.
Should any users have found problems do let us know at this point. Since
we wish as soon as possible to exchange current public release version
with the latest version 2.x capable of related dataforms.
You can comment to this list or send a "private" e-mail to
info-at-epidata.dk (exchange -at- with @)
regards
Jens Lauritsen
EpiData Association