EpiData-list February 2015

epidata-list@lists.umanitoba.ca

1 participants
3 discussions

by epidata-list＠lists.umanitoba.ca

Dear Sir, I am currently using EpiData manager for my data entry. I am facing few difficulties for which i am seeking solution from your expert team. My difficult is as follows. 1. Few questions in my questionnaire are relevant only for Married. My 3rd question captures about marital status. My 7th questions intends to find information relevant to married only. So, if a person is unmarried (when i enter in Q3 as unmarried) this Q7 should automatically get skipped because he is not married. But i am unable to do it in Epidata manager, because Epidata manager allows me to jump from Q3 to Q5 by skipping Q4, but not serving my purpose. Can suggestions on this ? 2. I have 4 boxes, 1st is year, 2nd is months, 3rd is week and 4th is days. I would like to create a 5th box which should automatically calculate [(1st box value *365) + (2nd box value *30) + (3rd box value *7) + (4th box value)]. How do i do this in epidata manager. Please help me out how best i can do this. Thanks & Regards, -- *Thiru*

8 years, 7 months

Manager and EntryClient - Identified bugs in latest release ?

by epidata-list＠lists.umanitoba.ca

Regarding the latest public release: _Manager_ *v2.0.0.25* _EntryClient_ *v2.0.0.10* During classes today (35 participants) for 5 hours I noticed very few problems aside from the following: 1 Users should be very much aware that they are NOT starting the software from within zip archives. Windows hides the actual folder type - unless you are aware of this. 2 EpiData Analysis: Some users had NOT installed the latest EpiData Analysis and could therefore not read the epx files created. Remedy: Check that you have V2.2 Rel. 2 (Build 183 ) (see caption). 3 In Manager: Ctrl+Z will NOT restore a deletion of a field - only moving the field to another position. 4 In Windows-8: Strange behaviour for three users having installed the software twice. They were not sure if they had taken the 64 or 32 bit versions. One pc in particular gave problems: After removing the installed versions and installing the 32 bit version, function was restored without problems. 4 A few bugs: a. If you select more than 2 project files for "double entry validation" - and then unselect files. Then the test of comparing the two files is NOT done. Remedy: Deselect all files and just mark two of them for comparison. Then it works. b. On Machintosh: Sometimes an entry field could be outside the "visible dataform" in EntryClient - and users could then not access that field c. On one particular pc with Windows 8 the EntryClient confused period and comma during entry in a float field, rejecting saving of a given record. Upon "save of record" the program crashed. Problem was solved after removal of software and fresh install from EpiData website . Please report problems and function as done previously. In particular on issues above. Following end of the classes (mid March) I will attempt to release all exercises for download from the website. regards Jens Lauritsen Initiator and Coordinator EpiData Association Denmark.

8 years, 7 months

RE: EpiData-list Digest, Vol 135, Issue 1

by epidata-list＠lists.umanitoba.ca

Dear Jens Humble request: please could you have a podcast of your classes online? sincerely Thambu Dr Thambu David Sudarsanam MD, DipNB Professor and Head Medicine Unit 2 and Clinical Epidemiology Unit Christian Medical College, Vellore 632004, India CONFIDENTIALITY NOTICE: This email contains information from the sender that may be CONFIDENTIAL, LEGALLY PRIVILEGED, PROPRIETARY or otherwise protected from disclosure. This email is intended for use only by the person or entity to whom it is addressed. If you are not the intended recipient, any use, disclosure, copying, distribution, printing, or any action taken in reliance on the contents of this email, is strictly prohibited. If you received this email in error, please contact the sending party by reply email, delete the email from your computer system and shred any paper copies. ________________________________________ From: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca] Sent: Tuesday, February 03, 2015 11:30 PM To: epidata-list(a)lists.umanitoba.ca Subject: EpiData-list Digest, Vol 135, Issue 1 Send EpiData-list mailing list submissions to epidata-list(a)lists.umanitoba.ca To subscribe or unsubscribe via the World Wide Web, visit http://lists.umanitoba.ca/mailman/listinfo/epidata-list or, via email, send a message with subject or body 'help' to epidata-list-request(a)lists.umanitoba.ca You can reach the person managing the list at epidata-list-owner(a)lists.umanitoba.ca When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..." EpiData-list mailing list ___________________________________ Today's Topics: 1. Manager and EntryClient - Identified bugs in latest release ? (epidata-list(a)lists.umanitoba.ca) ---------------------------------------------------------------------- Message: 1 Date: Mon, 02 Feb 2015 23:33:05 +0100 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] Manager and EntryClient - Identified bugs in latest release ? To: EpiData-list(a)lists.umanitoba.ca Message-ID: <54CFFB21.80202(a)epidata.dk> Content-Type: text/plain; charset=utf-8; format=flowed Regarding the latest public release: _Manager_ *v2.0.0.25* _EntryClient_ *v2.0.0.10* During classes today (35 participants) for 5 hours I noticed very few problems aside from the following: 1 Users should be very much aware that they are NOT starting the software from within zip archives. Windows hides the actual folder type - unless you are aware of this. 2 EpiData Analysis: Some users had NOT installed the latest EpiData Analysis and could therefore not read the epx files created. Remedy: Check that you have V2.2 Rel. 2 (Build 183 ) (see caption). 3 In Manager: Ctrl+Z will NOT restore a deletion of a field - only moving the field to another position. 4 In Windows-8: Strange behaviour for three users having installed the software twice. They were not sure if they had taken the 64 or 32 bit versions. One pc in particular gave problems: After removing the installed versions and installing the 32 bit version, function was restored without problems. 4 A few bugs: a. If you select more than 2 project files for "double entry validation" - and then unselect files. Then the test of comparing the two files is NOT done. Remedy: Deselect all files and just mark two of them for comparison. Then it works. b. On Machintosh: Sometimes an entry field could be outside the "visible dataform" in EntryClient - and users could then not access that field c. On one particular pc with Windows 8 the EntryClient confused period and comma during entry in a float field, rejecting saving of a given record. Upon "save of record" the program crashed. Problem was solved after removal of software and fresh install from EpiData website . Please report problems and function as done previously. In particular on issues above. Following end of the classes (mid March) I will attempt to release all exercises for download from the website. regards Jens Lauritsen Initiator and Coordinator EpiData Association Denmark. ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 135, Issue 1 ********************************************

8 years, 8 months

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

EpiData-list February 2015