September 2013 - EpiData-list - University of Manitoba Mailing Lists

Automatic Unique Identifier and Double Entry Verification Mode
by epidata-list＠lists.umanitoba.ca 20 Sep '13

20 Sep '13

Dear Jan and all Listers, I am sorry for not providing detailed information earlier. Well, I am using EpiData 3.1, and extract of the check file is provided at the end. I wished to do data validation using the Double Entry Verification mode, but when I used an automatically generated unique identifier for the records using three fields(district,school and student) it could not prompt for correction even when there was discordance. The key-field I selected *to prepare for double entry verification* was '* UNIQUE*'. However, when I selected key-field as '*STUDENT*' there was prompting for discordance. And yet student number alone may not uniquely identify records in the data set. What is the solution? DISTRICT COMMENT LEGAL USE label_district MUSTENTER REPEAT TYPE COMMENT END SCHOOL MUSTENTER REPEAT END SCHNAME MUSTENTER REPEAT END STUDENT RANGE 1 100 MUSTENTER AFTER ENTRY UNIQUE=DISTRICT+"-"+SCHOOL+"-"+STUDENT END END UNIQUE KEY UNIQUE NOENTER TYPE STATUSBAR "DIST-SCH-STD=" GREEN END GENDER LEGAL 1 2 END COMMENT LEGAL USE label_gender SHOW MUSTENTER TYPE COMMENT END AGE RANGE 10 50 MUSTENTER END M1 LEGAL 0 1 END MUSTENTER END M2 LEGAL 0 1 END MUSTENTER END Kizito. On 19 September 2013 20:00, <epidata-list-request(a)lists.umanitoba.ca> wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. Re: Automatic Unique Identifier and Double Entry Verification > Mode (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 18 Sep 2013 20:11:54 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: Re: [EpiData-list] Automatic Unique Identifier and Double > Entry Verification Mode > To: epidata-list(a)lists.umanitoba.ca > Message-ID: <5239ECEA.1050109(a)tbrieder.org> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Dear Kizito: > > It is a good rule to provide complete information before requesting > assistance. Your message is non-informative about the software > > Does your question concern: > - EpiData Entry 3.1? > - EpiData Manager, and if so which version? > - If you use EpiData Entry 3.1, could you show the part of the check > file that controls the field? > > Without this information, one cannot answer. > > Hans > > > On 18-Sep-13 11:19, epidata-list(a)lists.umanitoba.ca wrote: > > Dear Listers, > > > > sorry I am asking this again, since I received no help yet. > > > > I wanted to do data validation using the Double Entry Verification mode, > > but when I used an automatically generated unique identifier for the > > records using three field it could not prompt for correction even when > > there was discordance. > > > > What is the solution? > > > > Kizito > > > > -- > Hans L Rieder, MD, MPH > Jetzikofenstr 12 > 3038 Kirchlindach > Switzerland > > Tel: +41 31 829 4577 > Mob: +41 79 321 9122 > Web: http://www.tbrieder.org > > > > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 119, Issue 12 > ********************************************* >

1 2

Automatic Unique Identifier and Double Entry Verification Mode
by epidata-list＠lists.umanitoba.ca 18 Sep '13

18 Sep '13

Dear Listers, sorry I am asking this again, since I received no help yet. I wanted to do data validation using the Double Entry Verification mode, but when I used an automatically generated unique identifier for the records using three field it could not prompt for correction even when there was discordance. What is the solution? Kizito

1 1

RE: EpiData-list Digest, Vol 119, Issue 8
by epidata-list＠lists.umanitoba.ca 14 Sep '13

14 Sep '13

Dear All Stuck with exporting issues with epidata manager to SPSS Can anyone give me some advice-many data are merged in the same column in the SPSS file Thanks Dr Thambu David S Professor and Head Medicine Unit 2 Christian Medical College, Vellore 632004, India ________________________________________ From: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca] Sent: Thursday, September 12, 2013 10:31 PM To: epidata-list(a)lists.umanitoba.ca Subject: EpiData-list Digest, Vol 119, Issue 8 Send EpiData-list mailing list submissions to epidata-list(a)lists.umanitoba.ca To subscribe or unsubscribe via the World Wide Web, visit http://lists.umanitoba.ca/mailman/listinfo/epidata-list or, via email, send a message with subject or body 'help' to epidata-list-request(a)lists.umanitoba.ca You can reach the person managing the list at epidata-list-owner(a)lists.umanitoba.ca When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..." EpiData-list mailing list ___________________________________ Today's Topics: 1. Select Field for Validation (epidata-list(a)lists.umanitoba.ca) 2. Automatic Unique Identifier and Double Entry Verification Mode (epidata-list(a)lists.umanitoba.ca) ---------------------------------------------------------------------- Message: 1 Date: Thu, 12 Sep 2013 10:36:38 +0300 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] Select Field for Validation To: epidata-list(a)lists.umanitoba.ca Message-ID: <CAJ=nXPa0C5oQjNGx452y9XqwDt8pDumOXQDAEZSEkNvg976Oyw(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Dear Jammie, I tried copying a pair but it required re-arraging the check file. I thought there was another way out. Thank you! Kizito. ------------------------------ Message: 2 Date: Thu, 12 Sep 2013 10:48:29 +0300 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] Automatic Unique Identifier and Double Entry Verification Mode To: epidata-list(a)lists.umanitoba.ca Message-ID: <CAJ=nXPa9Z3xudowxWRSG5tTBxkhcrQryZt-w0=6LbPuUGAMAaQ(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Dear Listers, I wanted to do data validation using the Double Entry Verification mode, but when I used an automatically generated unique identifiers for the records it could not prompt even when there was discordance. What is the solution? Kizito On 10 September 2013 23:25, <epidata-list-request(a)lists.umanitoba.ca> wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. EpiC data export fails on STATA8 option > (epidata-list(a)lists.umanitoba.ca) > 2. Re: EpiC data export fails on STATA8 option > (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 9 Sep 2013 16:30:06 +0000 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] EpiC data export fails on STATA8 option > To: "'epidata-list(a)lists.umanitoba.ca'" > <epidata-list(a)lists.umanitoba.ca> > Message-ID: > <3C0AEE4CAF2E224B99497B5018BED09703D91D(a)mx02.ispm.unibe.ch> > Content-Type: text/plain; charset="us-ascii" > > Dear listers, > > I'm trying to convert EpiData files to Stata format. I've stumbled upon a > problem similar to the one described by Jan in a post from 2008: > > http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html > > (This is the only reference I've been able to find on the list and Google) > > My command and output are as follows: > > ------------------------------- > C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE > > EpiC - the EpiData command application version 3.1.2 14. Nov. 2006 > (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk > Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus > > 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F. > Access violation at address 00461B3F in module 'EpiC.exe'. Write of > address 022AC000. > ------------------------------- > > The files are converted correctly when I use "STATA" option, but since it > converts to Stata 6 version I don't get the correct variable names whenever > they are too long. I've tested it on two machines: one running Windows > Server 2008, and one on Linux (using Wine). The files are converted > correctly using EpiData 3.1 GUI. > > Are there any solutions to this problem? > > Thanks a lot for help, > radek > > > > > > ------------------------------ > > Message: 2 > Date: Mon, 09 Sep 2013 23:17:36 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: Re: [EpiData-list] EpiC data export fails on STATA8 option > To: epidata-list(a)lists.umanitoba.ca > Message-ID: <522E3AF0.7040303(a)epidata.dk> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > The EpiC command system from 2006 will not be fixed, but we will > consider developing a similar command line tool with the new system > functionality (epx). > > In other words - until this is done you have to do the process > repeatedly with the new software, which handles all new versions of > Stata (at least until v12) > > The template parser could be the first part of such a batch/cmd stand > alone tool.' > > Regards > Jens Lauritsen > EpiData Association > On 09/09/2013 06:30 PM, epidata-list(a)lists.umanitoba.ca wrote: > > Dear listers, > > > > I'm trying to convert EpiData files to Stata format. I've stumbled upon > a problem similar to the one described by Jan in a post from 2008: > > > > http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html > > > > (This is the only reference I've been able to find on the list and > Google) > > > > My command and output are as follows: > > > > ------------------------------- > > C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE > > > > EpiC - the EpiData command application version 3.1.2 14. Nov. 2006 > > (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk > > Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus > > > > 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F. > > Access violation at address 00461B3F in module 'EpiC.exe'. Write of > address 022AC000. > > ------------------------------- > > > > The files are converted correctly when I use "STATA" option, but since > it converts to Stata 6 version I don't get the correct variable names > whenever they are too long. I've tested it on two machines: one running > Windows Server 2008, and one on Linux (using Wine). The files are converted > correctly using EpiData 3.1 GUI. > > > > Are there any solutions to this problem? > > > > Thanks a lot for help, > > radek > > > > > > > > _______________________________________________ > > EpiData-list mailing list > > EpiData-list(a)lists.umanitoba.ca > > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > > > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 119, Issue 7 > ******************************************** > ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 119, Issue 8 ********************************************

1 1

EpiData Entry for Mac?
by epidata-list＠lists.umanitoba.ca 12 Sep '13

12 Sep '13

Does EpiData Entry have software to download to a MAC using OS X software? with interest, Ralph -- Ralph V. Katz, DMD, MPH, PhD Professor Department of Epidemiology & Health Promotion NYU College of Dentistry phone: (212) 998-9550 FAX: (212) 995-4436 email: ralph.katz(a)nyu.edu Mailing address: 250 Park Ave South, NY, NY 10003-1402 (mailing code: 9479) Office location: Rm 636, 6th Floor 250 Park Ave South (btw 19th & 20th St)

1 1

Automatic Unique Identifier and Double Entry Verification Mode
by epidata-list＠lists.umanitoba.ca 12 Sep '13

12 Sep '13

Dear Listers, I wanted to do data validation using the Double Entry Verification mode, but when I used an automatically generated unique identifiers for the records it could not prompt even when there was discordance. What is the solution? Kizito On 10 September 2013 23:25, <epidata-list-request(a)lists.umanitoba.ca> wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. EpiC data export fails on STATA8 option > (epidata-list(a)lists.umanitoba.ca) > 2. Re: EpiC data export fails on STATA8 option > (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 9 Sep 2013 16:30:06 +0000 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] EpiC data export fails on STATA8 option > To: "'epidata-list(a)lists.umanitoba.ca'" > <epidata-list(a)lists.umanitoba.ca> > Message-ID: > <3C0AEE4CAF2E224B99497B5018BED09703D91D(a)mx02.ispm.unibe.ch> > Content-Type: text/plain; charset="us-ascii" > > Dear listers, > > I'm trying to convert EpiData files to Stata format. I've stumbled upon a > problem similar to the one described by Jan in a post from 2008: > > http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html > > (This is the only reference I've been able to find on the list and Google) > > My command and output are as follows: > > ------------------------------- > C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE > > EpiC - the EpiData command application version 3.1.2 14. Nov. 2006 > (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk > Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus > > 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F. > Access violation at address 00461B3F in module 'EpiC.exe'. Write of > address 022AC000. > ------------------------------- > > The files are converted correctly when I use "STATA" option, but since it > converts to Stata 6 version I don't get the correct variable names whenever > they are too long. I've tested it on two machines: one running Windows > Server 2008, and one on Linux (using Wine). The files are converted > correctly using EpiData 3.1 GUI. > > Are there any solutions to this problem? > > Thanks a lot for help, > radek > > > > > > ------------------------------ > > Message: 2 > Date: Mon, 09 Sep 2013 23:17:36 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: Re: [EpiData-list] EpiC data export fails on STATA8 option > To: epidata-list(a)lists.umanitoba.ca > Message-ID: <522E3AF0.7040303(a)epidata.dk> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > The EpiC command system from 2006 will not be fixed, but we will > consider developing a similar command line tool with the new system > functionality (epx). > > In other words - until this is done you have to do the process > repeatedly with the new software, which handles all new versions of > Stata (at least until v12) > > The template parser could be the first part of such a batch/cmd stand > alone tool.' > > Regards > Jens Lauritsen > EpiData Association > On 09/09/2013 06:30 PM, epidata-list(a)lists.umanitoba.ca wrote: > > Dear listers, > > > > I'm trying to convert EpiData files to Stata format. I've stumbled upon > a problem similar to the one described by Jan in a post from 2008: > > > > http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html > > > > (This is the only reference I've been able to find on the list and > Google) > > > > My command and output are as follows: > > > > ------------------------------- > > C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE > > > > EpiC - the EpiData command application version 3.1.2 14. Nov. 2006 > > (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk > > Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus > > > > 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F. > > Access violation at address 00461B3F in module 'EpiC.exe'. Write of > address 022AC000. > > ------------------------------- > > > > The files are converted correctly when I use "STATA" option, but since > it converts to Stata 6 version I don't get the correct variable names > whenever they are too long. I've tested it on two machines: one running > Windows Server 2008, and one on Linux (using Wine). The files are converted > correctly using EpiData 3.1 GUI. > > > > Are there any solutions to this problem? > > > > Thanks a lot for help, > > radek > > > > > > > > _______________________________________________ > > EpiData-list mailing list > > EpiData-list(a)lists.umanitoba.ca > > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > > > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 119, Issue 7 > ******************************************** >

1 0

Select Field for Validation
by epidata-list＠lists.umanitoba.ca 12 Sep '13

12 Sep '13

Dear Jammie, I tried copying a pair but it required re-arraging the check file. I thought there was another way out. Thank you! Kizito.

1 0

EpiC data export fails on STATA8 option
by epidata-list＠lists.umanitoba.ca 09 Sep '13

09 Sep '13

Dear listers, I'm trying to convert EpiData files to Stata format. I've stumbled upon a problem similar to the one described by Jan in a post from 2008: http://lists.umanitoba.ca/pipermail/epidata-list/2008q3/001082.html (This is the only reference I've been able to find on the list and Google) My command and output are as follows: ------------------------------- C:\test>EpiC.exe e STATA8 PEDPATIENT28032012ES * REPLACE EpiC - the EpiData command application version 3.1.2 14. Nov. 2006 (C) Copyright 2002-2006 - EpiData Association, http://www.epidata.dk Programmed by M.Bruus. Design: JM.Lauritsen & M.Bruus 0 % doneException EAccessViolation in module EpiC.exe at 00061B3F. Access violation at address 00461B3F in module 'EpiC.exe'. Write of address 022AC000. ------------------------------- The files are converted correctly when I use "STATA" option, but since it converts to Stata 6 version I don't get the correct variable names whenever they are too long. I've tested it on two machines: one running Windows Server 2008, and one on Linux (using Wine). The files are converted correctly using EpiData 3.1 GUI. Are there any solutions to this problem? Thanks a lot for help, radek

1 1

Combine 2 or more rec files together
by epidata-list＠lists.umanitoba.ca 09 Sep '13

09 Sep '13

Dear members of theEpiData-Mailing list, I do my first steps with EpiData so please be tolerant with my disability. I just made some data entry when I recognized that I forgot to write down a variable in the qes-file. My way to handle the problem is to write a new qes-file than a new rec-file and start the data entry again from the beginning. But this can't be the accurate way, right? In your help-area I saw this hint here, but I really don't know how to find "Analysis" and I don't know, whether I can use this hint for my problem... /Richard, // //You can use Analysis to merge the files. It's easy to do manually: // //// //cd c:\directory with the files // //read file1 // //append file2 // //append file3 // //* etc // //savedata mergefile // //close // //// //If your file names are always the same, you can put those commands into // //a .pgm file to do this. // /// It would be very great if you can answer me my question, thank you very much in advance! Some of my colleagues said that I can combine several rec-files by exporting them to SPSS and than copy and paste the content - I hope you can recommend me an easier way! Greeting from Germany, Lea Dipper -- Dipl.-Psych. Lea Dipper Fakultät für Ingenieurwissenschaften und Informatik Institut für Psychologie und Pädagogik Abteilung Entwicklungspsychologie Albert-Einstein-Allee 47 Raum 47.0.423 Telefon: 0731/50 31726 Fax: 0731/50 23072 Universität Ulm

1 1

Epidata manager export to SPSS issues
by epidata-list＠lists.umanitoba.ca 06 Sep '13

06 Sep '13

Dear All I am unable to export data created in epidata manager to SPSS In the SPSS data file created,many variables get compressed into 1 variable, for example 2 or 3 nearby varaibles are all shown in the same column in SPSS However, the variable view of the same file it appears that all variables, variable labels and codes are seperate??? Perhaps i am making some elemenary error in the way i am doing things-if anyone has experienced this/could help me i would be much obliged Thanks Thambu Dr Thambu David S Professor and Head Medicine Unit 2 Christian Medical College, Vellore 632004, India ________________________________________ From: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca] Sent: Wednesday, September 04, 2013 10:32 PM To: epidata-list(a)lists.umanitoba.ca Subject: EpiData-list Digest, Vol 119, Issue 2 Send EpiData-list mailing list submissions to epidata-list(a)lists.umanitoba.ca To subscribe or unsubscribe via the World Wide Web, visit http://lists.umanitoba.ca/mailman/listinfo/epidata-list or, via email, send a message with subject or body 'help' to epidata-list-request(a)lists.umanitoba.ca You can reach the person managing the list at epidata-list-owner(a)lists.umanitoba.ca When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..." EpiData-list mailing list ___________________________________ Today's Topics: 1. RE: Epidatamanager to PSPP or SPSS issues (epidata-list(a)lists.umanitoba.ca) ---------------------------------------------------------------------- Message: 1 Date: Wed, 4 Sep 2013 12:32:05 +0530 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] RE: Epidatamanager to PSPP or SPSS issues To: "epidata-list(a)lists.umanitoba.ca" <epidata-list(a)lists.umanitoba.ca> Message-ID: <063C35AE5474CE4B93D2EAEF476684FB024E8210F157(a)mail.cmcvellore.ac.in> Content-Type: text/plain; charset="us-ascii" Dear Jens When i use epidata manager and export the data to SPSS i face a problem. In the SPSS datafile created, 2 or 3 variables get combined into 1 variable in the data for example the age , sex all are in one column;however in the same file if i look at the variable view,i see all data separately with the value labels separate and the codes separately. I contacted PSPP user group online and they suggested that this could be an issue with the epidata manager I hope you can help Thanks Thambu much obliged Thambu ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 119, Issue 2 ********************************************

1 0

Select Field for Validation
by epidata-list＠lists.umanitoba.ca 06 Sep '13

06 Sep '13

Dear Listers, I wish to validate two files but leave out one field which obviuosly has different entries since they identify the Data Entrants. How do I leave out a field from the validation process? Kizito. On 5 September 2013 20:02, <epidata-list-request(a)lists.umanitoba.ca> wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. epidatamanager: control-file-has-bad-permissions > (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 05 Sep 2013 11:26:53 -0300 > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] epidatamanager: > control-file-has-bad-permissions > To: epidata-list(a)lists.umanitoba.ca > Message-ID: <522894AD.9080406(a)ufba.br> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi > > Does anyone know what is this when I try to install epidata manager? I'm > using Ubuntu 13.04: > > Lintian check results for > /home/mcardeal/Downloads/setup.epidatamanager.1.4.2.0-0_i386.deb: > E: epidatamanager: control-file-has-bad-permissions postinst 0775 != 0755 > > This started happening after the last update EpiData (July 2013). While > reinstalling several times the error message continues. > Thanks > Mauricio > Federal University of Bahia, Brazil > > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 119, Issue 3 > ******************************************** >

1 1

epidatamanager: control-file-has-bad-permissions
by epidata-list＠lists.umanitoba.ca 05 Sep '13

05 Sep '13

Hi Does anyone know what is this when I try to install epidata manager? I'm using Ubuntu 13.04: Lintian check results for /home/mcardeal/Downloads/setup.epidatamanager.1.4.2.0-0_i386.deb: E: epidatamanager: control-file-has-bad-permissions postinst 0775 != 0755 This started happening after the last update EpiData (July 2013). While reinstalling several times the error message continues. Thanks Mauricio Federal University of Bahia, Brazil

1 1

RE: Epidatamanager to PSPP or SPSS issues
by epidata-list＠lists.umanitoba.ca 04 Sep '13

04 Sep '13

Dear Jens When i use epidata manager and export the data to SPSS i face a problem. In the SPSS datafile created, 2 or 3 variables get combined into 1 variable in the data for example the age , sex all are in one column;however in the same file if i look at the variable view,i see all data separately with the value labels separate and the codes separately. I contacted PSPP user group online and they suggested that this could be an issue with the epidata manager I hope you can help Thanks Thambu much obliged Thambu

1 0

Data validation using the same file
by epidata-list＠lists.umanitoba.ca 01 Sep '13

01 Sep '13

Hi, This may sound silly but I feel that I need to report this. When I tried to do the double entry validation using one single file (i.e. I selected one epx file twice for the purpose of validation), EpiData Manager did not prevent me to do this. It produced a report which, of course, has no discrepancy. I tried this on both EpiData Manager (v1.5.0.10) and (v1.4.2). Both gave me the same result. Below is an excerpt of the validation report I just created showing validation was attempted using the same epx file. ======================================== Report: Double Entry Validation Report. Created: 2013-08-31 04:40:35 ======================================== ------------------------------------------------------------------ File 1: C:\Users\Zaw Myo Tun\Documents\EpiData\examples\sample.epx File 2: C:\Users\Zaw Myo Tun\Documents\EpiData\examples\sample.epx ------------------------------------------------------------------ Best wishes, Zaw

1 1