- EpiData-list - University of Manitoba Mailing Lists

Can a certain feature be implemented or extended in EpiData ?
by epidata-list＠lists.umanitoba.ca 18 May '06

18 May '06

Dirk created a very precise description of the problem of the 64k size limitation of a .not file. and asks : > Question: Is there any other solution? Is it possible to improve > EpiData such that longer .not-files are possible? Since we are in control of the software in principle anything can be extended or adapted. As previously announced a conversion plan of EpiData Entry and Analysis to opensource has been made and we are looking for financing sources for the plan. The overwhelming number of downloads, increasing number of scientific publications, field reports and courses made with EpiData Software indicates the relevance of extending and securing the software. The total cost of the reprogramming of the entry module and adaptation of analysis amounts to the price of less than 250 one year licenses for SPSS or a similar number of single user permanent licenses for Stata. (300.000 Euro). In the rewriting all known problems and limitations will be considered, including the size problem of .not files. And I am sure many of them will be fixed. Anyone having knowledge of foundations, larger projects or other sources for funding should contact me directly for further information. Once something starts coming in I will create a "barometer" of achieved funding on the website. Kind regards Jens Lauritsen EpiData Association. "J L at epidata.dk " (remove spaces)

1 0

RE: [EpiData-list] size of EpiData note files
by epidata-list＠lists.umanitoba.ca 18 May '06

18 May '06

The same problem occurs with .chk files that exceed a certain size. Currently I need to split .qes and .chk files in several parts and connect them with RELATE. For our long questionnaires, this is only in some cases due to the 999 lines limitation for the .qes file, but even if the questionnaire fits 999 lines, I need to split the .qes and .chk files because of the fact that the .chk files get truncated at their maximum size. Is it possible to improve EpiData on this point? EpiData is such a useful program for our surveys in the field. It would be really be a great improvement if this limitation was not there! Thanks a lot! Dr Henrica A.F.M. (Henriette) Jansen Epidemiologist, WHO Multi-country Study Violence against Women Department of Gender, Women and Health Tel direct: +41 22 791 3106 Fax direct: +41 22 791 1585 Mobile: +41 78 730 3035 E-mail: jansenh(a)who.int Website: http://www.who.int/gender/violence/multicountry/en/ -----Original Message----- From: epidata-list(a)lists.umanitoba.ca [mailto:epidata-list@lists.umanitoba.ca] Sent: 17 May 2006 20:06 To: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] size of EpiData note files Unfortunately, if the size of the .not-files into which user-notes and EpiData generated notes are written exceeds about 64k, the coders can't enter further comments (although notes generated "automatically" via .chk-file commands will still be added). One solution to this problem is to close EpiData and to rename the .not-file. A new start of EpiData will then generate a new .not-file automatically. However, this solution is error prone, risky, and tedious: - you have to keep track of the size of the .not-files so that the coders can always enter their comments; - you may not overwrite renamed .not-files accidentally; - you have take care to collect/archive *all* renamed .not-files; - the solution is difficult to implement if the coders work independly and should not change files directly by themselves. Question: Is there any other solution? Is it possible to improve EpiData such that longer .not-files are possible? Current EpiData version: 3.1 (120306) [Sorry for any inconvience: I send this mail a second time because the first went not through - my email-address has changed and I was not recognized as a "member" of the list] Dirk -- ************************************************* Dr. Dirk Enzmann Institute of Criminal Sciences Dept. of Criminology Edmund-Siemers-Allee 1 D-20146 Hamburg Germany phone: +49-(0)40-42838.7498 (office) +49-(0)40-42838.4591 (Billon) fax: +49-(0)40-42838.2344 email: dirk.enzmann(a)uni-hamburg.de www: http://www2.jura.uni-hamburg.de/instkrim/kriminologie/Mitarbeiter/Enzman n/Enzmann.html *************************************************

1 0

size of EpiData note files
by epidata-list＠lists.umanitoba.ca 17 May '06

17 May '06

Unfortunately, if the size of the .not-files into which user-notes and EpiData generated notes are written exceeds about 64k, the coders can't enter further comments (although notes generated "automatically" via .chk-file commands will still be added). One solution to this problem is to close EpiData and to rename the .not-file. A new start of EpiData will then generate a new .not-file automatically. However, this solution is error prone, risky, and tedious: - you have to keep track of the size of the .not-files so that the coders can always enter their comments; - you may not overwrite renamed .not-files accidentally; - you have take care to collect/archive *all* renamed .not-files; - the solution is difficult to implement if the coders work independly and should not change files directly by themselves. Question: Is there any other solution? Is it possible to improve EpiData such that longer .not-files are possible? Current EpiData version: 3.1 (120306) [Sorry for any inconvience: I send this mail a second time because the first went not through - my email-address has changed and I was not recognized as a "member" of the list] Dirk -- ************************************************* Dr. Dirk Enzmann Institute of Criminal Sciences Dept. of Criminology Edmund-Siemers-Allee 1 D-20146 Hamburg Germany phone: +49-(0)40-42838.7498 (office) +49-(0)40-42838.4591 (Billon) fax: +49-(0)40-42838.2344 email: dirk.enzmann(a)uni-hamburg.de www: http://www2.jura.uni-hamburg.de/instkrim/kriminologie/Mitarbeiter/Enzmann/E… *************************************************

1 0

size of EpiData note files
by epidata-list＠lists.umanitoba.ca 17 May '06

17 May '06

Unfortunately, if the size of the .not-files into which user-notes and EpiData generated notes are written exceeds about 64k, the coders can't enter further comments (although notes generated "automatically" via .chk-file commands will still be added). One solution to this problem is to close EpiData and to rename the .not-file. A new start of EpiData will then generate a new .not-file automatically. However, this solution is error prone, risky, and tedious: - you have to keep track of the size of the .not-files so that the coders can always enter their comments; - you may not overwrite renamed .not-files accidentally; - you have take care to collect/archive *all* renamed .not-files; - the solution is difficult to implement if the coders work independly and should not change files directly by themselves. Question: Is there any other solution? Is it possible to improve EpiData such that longer .not-files are possible? Current EpiData version: 3.1 (120306) Dirk ************************************************* Dr. Dirk Enzmann Institute of Criminal Sciences Dept. of Criminology Edmund-Siemers-Allee 1 D-20146 Hamburg Germany phone: +49-(0)40-42838.7498 (office) +49-(0)40-42838.4591 (Billon) fax: +49-(0)40-42838.2344 email: dirk.enzmann(a)uni-hamburg.de www: http://www2.jura.uni-hamburg.de/instkrim/kriminologie/Mitarbeiter/Enzmann/E… *************************************************

1 0

Cuantos registros soporta/Limits in the number of records
by epidata-list＠lists.umanitoba.ca 11 May '06

11 May '06

(In english only the main figures) Estimado Andrés, Teóricamente EpiData Entry no tiene límitaciones en cuanto al número de registros. Se han hecho pruebas con hasta 250.000 registros (tested with 250.000 records) en un solo archivo y el programa ha funcionado. Hay una limitación en cuanto a las variables que pueden ponerse en un solo archivo QES. Se pueden incluir todas las que se quiera, pero no se puede sobrepasar el límite de 999 líneas de texto en el archivo. (999 max number of lines in a QES file) Creemos que ninguna de ellas son limitaciones importantes. Es importante recordar que si se trabaja con el editor de EpiData el tamaño máximo de un archivo QES o CHK no puede sobrepasar los 64kb. (max. size in a QES or CHK file if you want to use it with the EpiData Editor). En cuanto a EpiData Analysis, se ha probado con 100.000 registros (tested with 100.000 records), sin problemas. Espero que este sea de ayuda, Saludos Pedro Pedro Arias Bohigas John Ericssons gatan, 12 5 tr 112 22 Stockholm Sweden Phone (cell)+46(0)734421130 > Today's Topics: > > 1. cuantos registros soporta (epidata-list(a)lists.umanitoba.ca) > > llevo años trabajando con Epidata y estoy realizando un proyecto pero > tengo dudas sobre la capacidad de manejo del programa, cuantos > registros me soporta tranquilamente epidata y cuantos el Epidata > Analisys. > > gracias.... > > andres hincapie.

1 0

cuantos registros soporta
by epidata-list＠lists.umanitoba.ca 09 May '06

09 May '06

buenas tardes.... llevo años trabajando con Epidata y estoy realizando un proyecto pero tengo dudas sobre la capacidad de manejo del programa, cuantos registros me soporta tranquilamente epidata y cuantos el Epidata Analisys. gracias.... andres hincapie. __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.espanol.yahoo.com/

1 0

EpiData in resource limited settings?
by epidata-list＠lists.umanitoba.ca 03 May '06

03 May '06

Dear EpiData users, I have interest in assessing the impact of EpiData in terms of data documentation in lab. resource limited settings, specially in the area of HIV, Malaria and TB diagnosis. My focus is how to explore if the lab staff, with basic education background, can really use the EpiData, and manage to send the data by email? I have education and work experience in relation to public health informatics, making the human/IT approach smoother, biomedicine and in data documentation. I am looking for sites interested in such idea? Thank you in advance and best regards! Ziad -- Fellowship, graduate student (April - June, 2006) Division of Infectious Disease Stanford University Division of International Health (IHCAR) - Karolinska Institutet Ziad.El-Khatib(a)ki.se

1 1

Top of Page and clarification of histogram contents
by epidata-list＠lists.umanitoba.ca 02 May '06

02 May '06

Recent questions: 1. In "Epidata Entry", is it possible to create pages like in Epi-Info DOS with a mark for the page changing ? If you look in the help file under "new page" you will find: TOPOFSCREEN TopOfScreen in a fieldblock will result in the field being moved to the top of the data entry form when the user enters the field. This command can be used to mimick a change of page. Add a number to the command to indicate the number of lines that should be shown above the data entry field when the field is moved to the top of the screen. Example: TOPOFSCREEN TOPOFSCREEN 2 2. In "Epidata Analysis", for Histogramm, the command "XINC" is not working. You are right. The dialog will allow you to create a command like HISTOGRAM AGE /EDIT /XINC=10 but the option /xinc only works with scatter and line plots. The idea of a histogram is to give an overview of all data values from minimum to maximum. Whereas a bar graph will only use the values present in the data. The commands overview (read by pressing F1) should be clarified and the dialogs cleaned for non functional options. Time has not permitted this so far. ................................................................................................................................................................................... A new example of how to move values from one file to another during data entry has been placed on the http://www.epidata.dk/example.php page. Additionaly a flyer presenting EpiData software in general is now found on the main page and the download page. ................................................................................................................................................................................... Regards Jens Lauritsen EpiData Association

1 0

Two questions
by epidata-list＠lists.umanitoba.ca 01 May '06

01 May '06

Hello, 1. In "Epidata Entry", is it possible to create pages like in Epi-Info DOS with a mark for the page changing ? 2. In "Epidata Analysis", for Histogramm, the command "XINC" is not working. Thank you your answer. B. Branger, FRANCE.

1 0

Epidata with Nertworking
by epidata-list＠lists.umanitoba.ca 28 Apr '06

28 Apr '06

Hi Everyone, I have a quick question, I would like to know if it is possible to use Epidata on nertwork and more than one user to use it at the same time. Regards, Zaharani

1 2