- EpiData-list - University of Manitoba Mailing Lists

Re: Password request
by epidata-list＠lists.umanitoba.ca 21 May '14

21 May '14

Hi Ether, It seems to me that it is asking for your laptop's administrator password. You need to contact your IT administrator. Deepak On 21 May 2014 22:30, <epidata-list-request(a)lists.umanitoba.ca> wrote: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. password request (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 21 May 2014 07:30:30 -0700 (PDT) > From: epidata-list(a)lists.umanitoba.ca > Subject: [EpiData-list] password request > To: "epidata-list(a)lists.umanitoba.ca" > <epidata-list(a)lists.umanitoba.ca> > Message-ID: > <1400682630.93346.YahooMailNeo(a)web164604.mail.gq1.yahoo.com> > Content-Type: text/plain; charset=us-ascii > > Hi > I am a psychiatric epidemiologist from Uganda and I use epidata for our > community research. I have downloaded EpiDataentryclient 1.5.1.0 and while > installing it, I was asked for a password. > Can anyone provide me with this password. > Thank you & very best, > Ethel > > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 127, Issue 6 > ******************************************** >

1 0

How to calculate age
by epidata-list＠lists.umanitoba.ca 14 May '14

14 May '14

Kære EpiData. Jeg har fået et problem med at udregne alder og behandlingsvarighed, hvilket jeg slet ikke kan forstå, da jeg synes jeg har gjort det samme som i tidligere rec/chk files. Jeg har prøvet at kigge omkring i Jeres databaser efter hjælp, men kan ikke finde ud af, hvor mit problem stammer fra. Jeg har vedhæftet rec og chk. filer, kan I finde fejlen? Det er for variablerne age og time, at jeg har problemer. mvh Eva Eva Skovslund Nielsen Lægestuderende Forskningsårsstuderende Institut for Biomedicin, Aarhus Universitet Wilhelm Meyers Allé 4 Bygning 1242 8000 Aarhus C, Denmark E-mail: eva.skovslund(a)studmed.au.dk<mailto:eva.skovslund@studmed.au.dk> esn(a)farm.au.dk<mailto:esn@farm.au.dk>

1 1

Re: Automatic field entry
by epidata-list＠lists.umanitoba.ca 12 May '14

12 May '14

Ok, thank you. I'm waiting for scripting possibilities ... Labeling is not a solution for me, because Field2 depends on Field1 only when it has "A". If Field1 has different values, then Field2 must remain empty and still writeable. Christian. Message: 1 Date: Tue, 6 May 2014 15:44:20 -0400 From: epidata-list(a)lists.umanitoba.ca Subject: Re: [EpiData-list] Automatic field entry To: EpiData List <epidata-list(a)lists.umanitoba.ca> Message-ID: <BLU0-SMTP95EE8CE146F15A152E2B0FFD4F0(a)phx.gbl> Content-Type: text/plain; charset="windows-1252" You can do this by adding value labels to Field1: label for "A" is "K" etc. Then, on the Extended tab, choose to copy the label to Field2 Make Field2 NoEnter Scripting is not yet implemented, but is coming. This will allow much greater flexibility. Jamie On Apr 24, 2014, at 6:36 AM, epidata-list(a)lists.umanitoba.ca wrote: > Is there a chance to have an automatic value in a field depending on > the entered value in another field, i.e: > > Field_1 (entered by user): "A" > Field_2 (automatically filled with "K", when user has entered "A" in > Field_1): "K" > > I could not find a possibility to realise this by JUMPS or in the > EXTENDED register card. ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 127, Issue 3 ********************************************

1 0

Automatic field entry
by epidata-list＠lists.umanitoba.ca 06 May '14

06 May '14

Hello list, I'm new to Epidata, just building my first entry form. Is there a chance to have an automatic value in a field depending on the entered value in another field, i.e: Field_1 (entered by user): "A" Field_2 (automatically filled with "K", when user has entered "A" in Field_1): "K" I could not find a possibility to realise this by JUMPS or in the EXTENDED register card. I saw there were User Defined Functions in former releases of EPIDATA. Is this no longer possible in the new epidatamanager? Thanks for your attention! Christian

1 1

“Editing Standard Chart1” dialogue box chosen features should appear in the code of graph command
by epidata-list＠lists.umanitoba.ca 01 May '14

01 May '14

-

1 0

Epidata Entry Client Mac bug
by epidata-list＠lists.umanitoba.ca 01 May '14

01 May '14

Hi, I’ve been trying to use Epidata for data entry purposes. Excellent program! However, I noticed that in the current version of the Entry Client 1.4.4.2 the “Open” menu will not do anything (both on the drop down menu File->Open and the Button on the program). I downloaded the test version 1.5.1.0 and it seems to have the same bug as well. I can work around this by opening the file in Manager first and then opening it (as it shows in the “Open Recent ->” option). Otherwise it will not open a file. I don’t know if anyone has noticed this? I have been trying to see if I can use this for data collection. Thanks again for the excellent effort! Philip Ong, MD Baylor College of Medicine

1 1

RE: EpiData-list Digest, Vol 126, Issue 2
by epidata-list＠lists.umanitoba.ca 26 Apr '14

26 Apr '14

the problem with exporting to SPSS i have a variable called angina which is coded as 1 and 0 for yes and no when i export from manager to SPSS, half the varaibels have 1 and 0 but the rest have values-such as 234, 253 etc Other variables also have most correct but some exported like that- another examples even the unique id for a 450 item data set has ~ 50 variables expoted as number 23456, 24567 etc?? I hope my explanation of my problem is clear thank you thambu Dr Thambu David S Professor and Head Medicine Unit 2 Christian Medical College, Vellore 632004, India ________________________________________ From: epidata-list-bounces(a)lists.umanitoba.ca [epidata-list-bounces(a)lists.umanitoba.ca] On Behalf Of epidata-list-request(a)lists.umanitoba.ca [epidata-list-request(a)lists.umanitoba.ca] Sent: Friday, April 25, 2014 10:30 PM To: epidata-list(a)lists.umanitoba.ca Subject: EpiData-list Digest, Vol 126, Issue 2 Send EpiData-list mailing list submissions to epidata-list(a)lists.umanitoba.ca To subscribe or unsubscribe via the World Wide Web, visit http://lists.umanitoba.ca/mailman/listinfo/epidata-list or, via email, send a message with subject or body 'help' to epidata-list-request(a)lists.umanitoba.ca You can reach the person managing the list at epidata-list-owner(a)lists.umanitoba.ca When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..." EpiData-list mailing list ___________________________________ Today's Topics: 1. Automatic field entry (epidata-list(a)lists.umanitoba.ca) 2. (no subject) (epidata-list(a)lists.umanitoba.ca) 3. Exporting from Epidata manager to SPSS (epidata-list(a)lists.umanitoba.ca) 4. Re: Exporting from Epidata manager to SPSS (epidata-list(a)lists.umanitoba.ca) ---------------------------------------------------------------------- Message: 1 Date: Thu, 24 Apr 2014 12:36:08 +0200 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] Automatic field entry To: <epidata-list(a)lists.umanitoba.ca> Message-ID: <FAA90C533C372D4B98E7EBBF1FC2DDCD145D92(a)cuxmailn.cux.local> Content-Type: text/plain; charset="US-ASCII" Hello list, I'm new to Epidata, just building my first entry form. Is there a chance to have an automatic value in a field depending on the entered value in another field, i.e: Field_1 (entered by user): "A" Field_2 (automatically filled with "K", when user has entered "A" in Field_1): "K" I could not find a possibility to realise this by JUMPS or in the EXTENDED register card. I saw there were User Defined Functions in former releases of EPIDATA. Is this no longer possible in the new epidatamanager? Thanks for your attention! Christian ------------------------------ Message: 2 Date: Fri, 25 Apr 2014 14:29:48 +0530 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] (no subject) To: "epidata-list(a)lists.umanitoba.ca" <epidata-list(a)lists.umanitoba.ca> Message-ID: <063C35AE5474CE4B93D2EAEF476684FB027F11478337(a)mail.cmcvellore.ac.in> Content-Type: text/plain; charset="us-ascii" ------------------------------ Message: 3 Date: Fri, 25 Apr 2014 14:30:48 +0530 From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] Exporting from Epidata manager to SPSS To: "epidata-list(a)lists.umanitoba.ca" <epidata-list(a)lists.umanitoba.ca> Message-ID: <063C35AE5474CE4B93D2EAEF476684FB027F11478338(a)mail.cmcvellore.ac.in> Content-Type: text/plain; charset="us-ascii" Dear All I have a problem. I have a STATA file that i need to convert to PSPP/SPSS as i only have PSPP when i import the STATA file to epidata manager i get all data imported correctly However when i export the same file to SPSS ,many variables do not export correctly I hope someone can help with this Sincerely Thambu Dr Thambu David S Professor and Head Medicine Unit 2 Christian Medical College, Vellore 632004, India ------------------------------ Message: 4 Date: Fri, 25 Apr 2014 11:03:52 +0200 From: epidata-list(a)lists.umanitoba.ca Subject: Re: [EpiData-list] Exporting from Epidata manager to SPSS To: epidata-list(a)lists.umanitoba.ca Message-ID: <535A24F8.8040500(a)epidata.dk> Content-Type: text/plain; charset=UTF-8; format=flowed On 2014-04-25 11:00, epidata-list(a)lists.umanitoba.ca wrote: > Dear All > I have a problem. > I have a STATA file that i need to convert to PSPP/SPSS as i only have PSPP > when i import the STATA file to epidata manager i get all data imported correctly > However when i export the same file to SPSS ,many variables do not export correctly > I hope someone can help with this Please be a little more specific as to what is not working? All we know is that it does not work as intended, but not what the nature of the problem is... Regards, Torsten Christiansen EpiData. ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 126, Issue 2 ********************************************

1 1

Exporting from Epidata manager to SPSS
by epidata-list＠lists.umanitoba.ca 25 Apr '14

25 Apr '14

Dear All I have a problem. I have a STATA file that i need to convert to PSPP/SPSS as i only have PSPP when i import the STATA file to epidata manager i get all data imported correctly However when i export the same file to SPSS ,many variables do not export correctly I hope someone can help with this Sincerely Thambu Dr Thambu David S Professor and Head Medicine Unit 2 Christian Medical College, Vellore 632004, India

1 1

(no subject)
by epidata-list＠lists.umanitoba.ca 25 Apr '14

25 Apr '14

1 0

Help with 'Reading' an epx file with EpiDataAnalysis after entering records in DataEntry
by epidata-list＠lists.umanitoba.ca 08 Apr '14

08 Apr '14

>> Hi There! >> >> I am hoping that you can help me with this problem that I am facing. >> >> It seems that after I save my project after doing data entry - the data analysis is not able to read the project - whenever I open the epx file - it says ‘Loading data C:\Users\…..\MyProject.epx, please wait….’ and nothing happens. >> >> I try to read the samples provided but there’s no problem with it. >> >> I am just wondering what did I do wrong in saving my project after DataEntry that DataAnalysis is not able to read it? >> >> I also could not locate the REC file as well. My version of epidata manager is 1.4.4.4, entry client 1.4..4.2, and data analysis manager of v2.2 build 182. >> >> Thank you very much. I look forward to hearing from you. >> >> Regards >> Teddy On 8 Apr 2014, at 6:43 pm, jens lauritsen <jl(a)epidata.dk> wrote: > Please send your question again, but to the epidata-list, not to list owner. > > Add to your list the version of EpiData Manager, you are using. See help file "copy version". > > regards > Jens Lauritsen > > On 08-04-2014 09:05, Teddy wrote: >> Hi There! >> >> I am hoping that you can help me with this problem that I am facing. >> >> It seems that after I save my project after doing data entry - the data analysis is not able to read the project - whenever I open the epx file - it says ‘Loading data C:\Users\…..\MyProject.epx, please wait….’ and nothing happens. >> >> I try to read the samples provided but there’s no problem with it. >> >> I am just wondering what did I do wrong in saving my project after DataEntry that DataAnalysis is not able to read it? >> >> I also could not locate the REC file as well. >> >> Thank you very much. I look forward to hearing from you. >> >> Regards >> Teddy >

1 0