- EpiData-list - University of Manitoba Mailing Lists

Réponse automatique d'absence du bureau : [EpiData-list] FW: Fw: Fw: Doorst.: FW: Read & Respond
by epidata-list＠lists.umanitoba.ca 23 Aug '07

23 Aug '07

Bonjour, Je suis actuellement absent du bureau.Je serai de retour le 3 septembre 2007 Je répondrai à cette date à votre message A bientôt Hello, I am currently out of the office and will be back on September the 3rd, 2007 I will reply to your message then. All the best Robert

1 0

FW: Fw: Fw: Doorst.: FW: Read & Respond
by epidata-list＠lists.umanitoba.ca 23 Aug '07

23 Aug '07

> -----Ursprüngliche Nachricht----- > Von: "B. Wiedemann" <x-72(a)gmx.de> > Gesendet: 23.08.07 09:24:18 > An: christopher.bohn2(a)travedsl.de, ilsa.ramm(a)gmx.de, b-loewe(a)web.de, m.siebelts(a)email.de, lottaleben(a)atomstromfrei.de > Betreff: Fwd: Fw: Fw: Doorst.: FW: Read & Respond -------- Original-Nachricht -------- > Datum: Thu, 16 Aug 2007 07:49:53 +0200 > Von: "Jochen Fölsterprivat" <jochen.foelster(a)foefi.de> > An: "Yvonne Moutoux" <Moutoux(a)gmx.de>, "tina johanssen" <tina_johanssen(a)yahoo.de>, "michelle" <michelle.sachs(a)gmx.net>, "Beate x-72" <x-72(a)gmx.de>, "Aljonna" <aljonna(a)foefi.de>, "aareinhild" <reinhild.fragel(a)foefi.de> > Betreff: Fw: Fw: Doorst.: FW: Read & Respond > ----- Original Message ----- From: <Grunigrunewald(a)aol.com> > To: <airoff2(a)ham.airport.de>; <Almuth.Hanke(a)gmx.de>; <McClouds(a)Collie.de>; > <chengizkaan2004(a)hotmail.com>; <Doris.Steiner(a)sparkasse-stormarn.de>; > <jochen.foelster(a)foefi.de>; <Katfoel(a)aol.com>; <knebel(a)esenet.dk>; > <mail(a)jenskohnert.de>; <koschoe(a)de.ibm.com> > Sent: Wednesday, August 15, 2007 10:51 PM > Subject: Fwd: Fw: Doorst.: FW: Read & Respond > > > > > > > > > > > > > -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. > Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail > > ----------------------------------------------------------------- > > > > ----- Original Message ----- > From: esther > > To: Dirk Huizinga > > Cc: frank ; ilonka ; Jacquie Smilde ; karolina bonefaas ; Peter ; Sandra Koegler-Lieshout ; W.G. Schönhage > > Sent: Wednesday, August 15, 2007 12:42 PM > > Subject: Doorst.: FW: Read & Respond > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Read this...I mean REALLY read this > > > > > > > > > > This is without a doubt one of the nicest good luck forwards I have received. Hope it works for you -- and me! > > > You have 6 minutes > > > There's some mighty fine advice in these words, even if you're not superstitious. This has been sent To you for good luck from the Anthony Robbins organization. It has been sent around the world ten times so Far. > > > Do not keep this message. > > > This must leave your hands in 6 MINUTES. Otherwise you will get a very unpleasant surprise. This is true, even if you are not superstitious, agnostic, or otherwise faith impaired. > > > > > > > ONE. > > > Give people more than they expect and do it cheerfully. > > > TWO > > > . Marry a man/woman you love to talk to. As you get older, their conversational skills will be as important as any other. > > > THREE. > > > Don't believe all you hear, spend all you have or sleep all you want. > > > FOUR > > > . When you say, "I love you ," mean it. > > > FIVE. > > > When you say, "I'm sorry," look the person in the eye. > > > SIX > > > . Be engaged at least six months before you get married. > > > SEVEN. > > > Believe in love at first sight. > > > EIGHT. > > > Never laugh at anyone's dream. People who don't have dreams don't have much. > > > NINE > > > . Love deeply and passionately. You might get hurt but it's the only way to live life completely. > > > TEN. > > > . In disagreements, fight fairly. No name calling. > > > ELEVEN > > > . Don't judge people by their relatives. > > > TWELVE. > > > Talk slowly but think quickly. > > > THIRTEEN > > > . When someone asks you a question you don't want to answer, smile and ask, "Why do you want to know?" > > > FOURTEEN > > > . Remember that great love and great achievements involve great risk. > > > > FIFTEEN. > > > Say "bless you" when you hear someone sneeze. > > > > SIXTEEN > > > . When you lose, don't lose the lesson ! > > > SEVENTEEN > > > . Remember the three R's: Respect for self; Respect for others; and responsibility for all your actions. > > > EIGHTEEN. > > > Don't let a little dispute injure a great friendship. > > > NINETEEN. > > > When you realize you've made a mistake, take immediate steps to correct it. > > > TWENTY. > > > Smile when picking up the phone. The caller will hear it in your voice > > > > TWENTY-ONE. > > > Spend some time alone. > > > > Now, here's the FUN part! > > > Send this to at least 5 people and your life will improve. 1-4 people: Your life will improve slightly. > > > 5-9 people: Your life will improve to your liking. > > > 9-14 people: You will have at least 5 surprises in the next 3 weeks > > > 15 and above: Your life will improve drastically and everything you ever dreamed of will begin to take shape. > > > A true friend is someone who reaches for your hand and touches your heart. Do not keep this message > > > > > > ********************************************************************************************************* > > > > > > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.476 / Virus Database: 269.11.11/944 - Release Date: 9/08/2007 2:44 p.m. > > > ----------------------------------------------------------------- > Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it! > > > > > > > > > > > > > > > > > > > > >

1 0

Ranked variable questions
by epidata-list＠lists.umanitoba.ca 23 Aug '07

23 Aug '07

Hello everyone I have been asked to set up a database for a questionnaire that has already been written. I was going to set it up in epidata but my problem is how to deal with a question that asks people to rank options. The question gives a list of topics and asks the person filling in the questionnaire to rank them from 1-10 in order of importance. (It is for a city council and they want to know what young people are most concernred about so the choices are crime, employment, environment etc). I thought in the qes I could just make a variable for each topic and enter the number the respondent puts beside it, but I don't know how to then analyse the answers, so I can find out what the top 10 issues are overall. If anyone has done this before and can offer a suggestion I would be grateful thanks Christine Christine Roseveare Analyst Regional Public Health 570 9194 027 495 9671 -- The information contained in this email and any attachments is confidential and may be legally privileged. If you have received this message in error, please notify the sender immediately and remove all copies of the message, including any attachments. Any views or opinions expressed in this email (unless otherwise stated) may not represent those of Hutt Valley DHB. Thank you. ** Disclaimer added by HVDHB **

1 0

Re: Incomplete execution of PGM due to no observations in a select
by epidata-list＠lists.umanitoba.ca 20 Aug '07

20 Aug '07

Just add "IMIF" in each select group: (here shown with one group): TYPE "\LTABLE SHOWING ILLNESS IN THE SES CLASS 2" SELECT SES=2 count /q * in the next line we use a resultvariable called $count: * resultvariables are shown with the command "result" imif $count > 0 then TABLES SEX ILLNESS else type "No observations" endif Select Regards Jens Lauritsen EpiData Association

1 0

Incomplete execution of PGM
by epidata-list＠lists.umanitoba.ca 20 Aug '07

20 Aug '07

Dear All, I am bringing to your kind attention one more and last problem. Hopefully this will be looked into before the release of ver 2 of Epidata Analysis. I have a sample database of distribution of illness according to the socio- economic status in the population. The socio- economic status is divided into 1,2 and 3 classes. The sample SES.pgm is listed below.. *SES.PGM CLS CLOSE SET ECHO=OFF READ "D:\EPIDATA\SES\SES.REC" TYPE "\LTABLE SHOWING ILLNESS IN THE SES CLASS 1" SELECT SES=1 TABLES SEX ILLNESS SELECT TYPE "\LTABLE SHOWING ILLNESS IN THE SES CLASS 2" SELECT SES=2 TABLES SEX ILLNESS SELECT TYPE "\LTABLE SHOWING ILLNESS IN THE SES CLASS 3" SELECT SES=3 TABLES SEX ILLNESS SELECT *END OF PGM When I run the PGM, following output is generated. TABLES SHOWING ILLNESS IN THE SES CLASS 1 Sex Illness F M Total N 2 1 3 Y 0 3 3 Total 2 4 6 TABLES SHOWING ILLNESS IN THE SES CLASS 2 No data! Operation aborted Since there is no data in the socio-economic class 2, the PGM aborts the operation. The rest of the PGM is not processed. I am attaching a sample SES.ZIP containing the necessary qes, chk and rec files. The latest test ver 2 (build 112b) of Epi Analysis was used. If this feature is looked into, large PGMs can be run without sny break. Is there any solution of this problem? Dr. Shavinder Singh

1 0

reuse labels in several files
by epidata-list＠lists.umanitoba.ca 17 Aug '07

17 Aug '07

epidata-list-request(a)lists.umanitoba.ca wrote: > Often, one uses questionnaires where the items and a value labels might > be identical for dozens or more questions. It seems that EpiData creates > a block in the .CHK file that applies to one variable only. Is there a > way to apply the same checks and labels to several variables at the same > time? > Technique 1: Common label definitions in EpiData.LBL. When you start EpiData Entry there is a default label collection. If you often use the same labels then edit the file EpiData.lbl which you will find in the same folder as the EpiData Enter system (epidata.exe) installed. Then for a given new file create the rec file and in the Enter system use "Add/revise" to add checks to the file. a Go to the first of the variables which should have a given label b. Choose from the list of your predefined labels contained in "Epidata.lbl" and read into the definition box. c. Now switch back to the field in question (F6 goes from the definition box to the field and vice versa). d. Press Ctrl+C e. Move the cursor to each of the other fields and press Ctrl+V and the definition is copied. It takes very short time. If you are thing instead of missing values etc. look in the help file: MISSINGVALUE Missing value has three syntaxes: MISSINGVALUE x [y [z]] which can be used in fieldblocks, and MISSINGVALUE ALL x [y [z]] which can be used in BEFORE FILE blocks, and MISSINGVALUE field1-field5, field6 …. x [y [z]] which can be used in BEFORE FILE blocks You see that in this case you can use syntax similar to Stata x-y . But for labels the trick above is the only possible. Technique 2: automatic revise of a larger file for subsets: The other technique to use is to create a common (large) file with all relevant questions, properly labelled. Then for a given substudy do: 1. create copies of the common large rec file and associated chk file 2. create copy of qes file 3. edit the qes file and delete sections not currently needed. 4. choose the rec file for entering data. Enter will "see" that the qes file has a more recent date and time and will suggest to adapt the structure to the qes file. Say yes to this and you will see that a number of no longer used variables will be removed including the chk for those. In terms of the analysis programme the issue is somewhat different, but I read the question as being relevant for entry. regards Jens Lauritsen EpiData Association

1 0

Epidata: apply the same value labels and validity checks to many variables
by epidata-list＠lists.umanitoba.ca 17 Aug '07

17 Aug '07

Hi, Often, one uses questionnaires where the items and a value labels might be identical for dozens or more questions. It seems that EpiData creates a block in the .CHK file that applies to one variable only. Is there a way to apply the same checks and labels to several variables at the same time? I appreciate that one can go into a text editor and copy the block as many times as necessary and then changing the variable names. it would be great if one could use syntax similar to SPSS or Stata where information can be applied to a variable list such as VAR001-VAR010 the same way it is applied to individual variables. Thanks! John LeBlanc __________________________________________________________ John C. LeBlanc, MD, MSc, FRCPC Associate Professor Pediatrics, Psychiatry, Community Health and Epidemiology Dalhousie University IWK Health Centre Work phone: (902) 470-8930 5850 University Avenue Work fax: (902) 470-6913 Halifax, Nova Scotia Email: John.LeBlanc(a)Dal.Ca B3K 6R8 CANADA Pager: (902) 470-8888 __________________________________________________________

1 1

Relational Files Relate Error
by epidata-list＠lists.umanitoba.ca 14 Aug '07

14 Aug '07

Dear All, I have a relational database comprising of 8 data entry forms. The structure is as follow; FFNO FAMIDNUM CARD Family --------------- Ecouple ----------------------- Under5 ------ Growth Monitoring form | | | | | FFNO | CSNO | | | | Agesex Form Contraception The field names in capital are unique key fields for relating the form during data entry. When I relate Growth Monitoring form Under5 form, the relating happens. When I relate Under5 Form with Ecouple the following message is displayed. Loading data D:\EpiData\Try\Gm.rec, please wait.. Excluded: 1243184 records marked for deletion File name : D:\EpiData\Try\Gm.rec Growth Monitoring Register Fields: 9 Total records: 6 Included: 6 . relate card UNDER5 Loading data D:\EpiData\Try\UNDER5.REC, please wait.. Excluded: 1243148 records marked for deletion File name : D:\EpiData\Try\UNDER5.REC . relate FAMIDNUM Ecouple Loading data D:\EpiData\Try\Ecouple.REC, please wait.. Excluded: 1243148 records marked for deletion 1 4218388 The relation happens only up to 2 forms only. What is meant by the error message 1 4218388 Is there any way out. I am doing it through EPI6 at present which does it seamlessly. Do we still have development issue regarding RELATE command in the Epidata Analysis (Ver 2 Build 112b). I am attaching this sample database in the form of CHC ZIP. Please enlighten upon this problem. Sincerely, Dr. Shavinder .

1 1

EpiData-list Digest
by epidata-list＠lists.umanitoba.ca 14 Aug '07

14 Aug '07

Hello, Two questions : - in the last version (build 122), how to obtain the same result with "set table label = on/ff" than anterior versions ? - in the further versions, is it possible to obtain a box-plot with two or more co-variables ? Thank you B. Branger, Nantes, France

1 0

Floating point error in analysis (describe)
by epidata-list＠lists.umanitoba.ca 06 Aug '07

06 Aug '07

re: "invalid floating pint" error with DESCRIBE in Analysis > I use the command line editor to issue DESCRIBE * command, and I get descriptive summaries of all variables, including the variable called AMOUNT. > > But when I issue the command DESCRIBE AMOUNT, I get an error message: Invalid floating point operation > > Please do the following: 1. Download the most recent testing version of EpiData Analysis: www.epidata.dk/testing.php 2. Retry the same analysis 3. Report to the list if the problem persisted. 4. If the problem persisted: a. pack your data file in a zip file (e.g. with epidata entry - tools menu). b. report the error to the epidata mantis system http://www.epidata.dk/php/mantis/login_page.php and upload the zip file as part of the error report. Kind regards Jens Lauritsen EpiData Association

1 2