- EpiData-list - University of Manitoba Mailing Lists

Entering comments
by epidata-list＠lists.umanitoba.ca 24 Aug '12

24 Aug '12

Dear all, Please advise on how to enter comments for example 10 If Yes,Who: ÿ 1=Husband ÿ 2=Mother ÿ 3=Mother-in-law ÿ 4=Family Member: Other ÿ 5=Physician or Other Health Practioner ÿ6=Community Health Worker ÿ7=Traditional Healer ÿ8=Relative or Neighbour ÿ9=Radio Programme ÿ10=Other (specify): How in the qes do i allow room for comments on 4. and 10.

1 0

Entering qualitative data
by epidata-list＠lists.umanitoba.ca 24 Aug '12

24 Aug '12

How can i enter data like subject responses for example 41.When is measles vaccine supposed to be given? the answer is a sentance

1 0

multi-sheet project
by epidata-list＠lists.umanitoba.ca 20 Aug '12

20 Aug '12

I have 7 old REC-files. I imported them to the new data format with "add structure". I saw that I can append all sheets together to one big sheet. But I don't want it. Is there a way to create one project (epx-file) with 7 separate sub-sheets in it?

1 6

editing qes- and chk-files?
by epidata-list＠lists.umanitoba.ca 17 Aug '12

17 Aug '12

Here is an old EpiData project with seven sheets (rec-files). The doc about the project describe how to add "user-defined variables". Sheet number 7 is prepared for this and the user just have to edit the qes- and maybe the chk-file with an text-editor. It sounds realy old and obsulet. Am I right? Convertet the rec-files to the new epx-format there is no need to edit the file manualy with hand, right? There is the EpiData Manager for this job, right? Can I forget the qes- and chk-files if I have the new epx or are they related to each other?

1 0

history of EpiData
by epidata-list＠lists.umanitoba.ca 17 Aug '12

17 Aug '12

I'm quite new with EpiData but I'm working on an old project that use a EpiData version from 2005. I need to know what happend to EpiData in the last 7 years. ;) Am I right that in 2005 there where only one EpiData package. But know it is splited into Manager, EntryClient, Analysis? What is the big difference between 2005 and now?

1 1

sum of two variables automatically
by epidata-list＠lists.umanitoba.ca 16 Aug '12

16 Aug '12

This may be a stupid question, I used the new version of Epidata to create a database and I want to create an entry (V3) the sum of the previous two entries (V1 + V2): V1 = x V2 = y V3 = sum (V1 + V2) Can someone give me the procedure or point me to a good tutorial? thank you very much = ps files are in format (. epx)

1 0

Re: EpiData-list Digest, Vol 106, Issue 7
by epidata-list＠lists.umanitoba.ca 13 Aug '12

13 Aug '12

Both new but both very promising and well worth a try Joe Dr. J.M. Dooley Professor of Pediatrics Head, Pediatric Neurology Division Dalhousie University and IWK Health Centre 5850/5980 University Avenue Halifax, Nova Scotia B3K 6R8 Quoting epidata-list-request(a)lists.umanitoba.ca: > Send EpiData-list mailing list submissions to > epidata-list(a)lists.umanitoba.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > or, via email, send a message with subject or body 'help' to > epidata-list-request(a)lists.umanitoba.ca > > You can reach the person managing the list at > epidata-list-owner(a)lists.umanitoba.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of EpiData-list digest..." > > > EpiData-list mailing list > ___________________________________ > > Today's Topics: > > 1. RE: corrupted files (epidata-list(a)lists.umanitoba.ca) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 13 Aug 2012 08:24:39 +0200 > From: epidata-list(a)lists.umanitoba.ca > Subject: RE: [EpiData-list] corrupted files > To: <epidata-list(a)lists.umanitoba.ca> > Message-ID: > <2B0BDB25934D824280073BE8D73FBB98B1195A(a)mx01.ispm.unibe.ch> > Content-Type: text/plain; charset="iso-8859-1" > > Dear all > > Thank you very much for all the suggestions that I received to solve > my problem with corrupted data. Finally one solution was successful: > my colleague sent me the files as zip-archive instead as normal > attachments per email and now I can open them. > > Best wishes, Nicole > > Dr. med. Nicole Bender, MD PhD MSc > Specialist in Prevention and Public Health FMH > University of Bern > Institute of Social and Preventive Medicine > Finkenhubelweg 11 > 3012 Bern > Switzerland > Tel: +41 31 631 36 16 > Fax: +41 31 631 35 20 > Email: nbender(a)ispm.unibe.ch > http://www.ispm.ch/ > > -----Original Message----- > From: epidata-list-bounces(a)lists.umanitoba.ca > [mailto:epidata-list-bounces@lists.umanitoba.ca] On Behalf Of > epidata-list(a)lists.umanitoba.ca > Sent: Dienstag, 7. August 2012 22:05 > To: epidata-list(a)lists.umanitoba.ca > Subject: Re: [EpiData-list] corrupted files > > Nicole: > > Worth a try: > > A > 1) Make a copy of both REC files > 2) Save a subset of each REC file containing only the data structure > (cut off before the first record) > 3) Use a proper text editor (surely not NotePad...) that allows > comparison of the two files and indicates where a discordance is (if > there is any) > 4) If there is a discordance, paste the file from 3) that originates > from the functional original over the appropriate place in the > non-functional one > 5) Try to open the "repaired' REC file > > B > 1) If the problem is not in the structure, then it must be in an > individual record > 2) If that should be the case, it gets tedious. One would start by > checking if the record ending exclamation ! is everywhere available > > C > If all fails, send me an email. As I am "around the corner" (well > sufficiently in the vicinity), I could pass by at your office and we > could look at it together. > > Hans > > > On 07-Aug-12 13:57, epidata-list(a)lists.umanitoba.ca wrote: >> Dear all >> I cannot open the EpiData rec files from my colleague, the error message >> "one or more records are corrupted" shows up. My colleague can open the >> files normally. We are both using EpiData version 3.1. >> I looked at the files in the notepad, but it seems to me that they look >> like my own files (which are fine). >> Can somebody help me? I need my colleague's files to validate duplicate >> files with my files. >> >> Thank you very much, best wishes, >> >> Nicole >> >> > > -- > Hans L Rieder, MD, MPH > Jetzikofenstr 12 > 3038 Kirchlindach > Switzerland > > Tel: +41 31 829 4577 > Mob: +41 79 321 9122 > Web: http://www.tbrieder.or > > > _______________________________________________ > EpiData-list mailing list > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > > > ------------------------------ > > ________________________________________ > EpiData-list(a)lists.umanitoba.ca > http://lists.umanitoba.ca/mailman/listinfo/epidata-list > > > End of EpiData-list Digest, Vol 106, Issue 7 > ******************************************** > >

1 0

corrupted files
by epidata-list＠lists.umanitoba.ca 13 Aug '12

13 Aug '12

Dear all I cannot open the EpiData rec files from my colleague, the error message "one or more records are corrupted" shows up. My colleague can open the files normally. We are both using EpiData version 3.1. I looked at the files in the notepad, but it seems to me that they look like my own files (which are fine). Can somebody help me? I need my colleague's files to validate duplicate files with my files. Thank you very much, best wishes, Nicole Dr. med. Nicole Bender, MD PhD MSc Specialist in Prevention and Public Health FMH University of Bern Institute of Social and Preventive Medicine Finkenhubelweg 11 3012 Bern Switzerland Tel: +41 31 631 36 16 Fax: +41 31 631 35 20 Email: nbender(a)ispm.unibe.ch <mailto:nbender@ispm.unibe.ch> http://www.ispm.ch/ <http://www.ispm.ch/>

1 3

Re: corrupted files
by epidata-list＠lists.umanitoba.ca 10 Aug '12

10 Aug '12

Nicole, How do you exchange the .rec-files? Via a Unix operating system to Windows, e.g. via the internet? It may happen that this modifies the <cr><lf> (carriage return/line feeds) at the end of the lines. One solution would be to send/receive files packed in .zip files, that way the <cr><lf> characters should be kept as they are. Another possibility is using a good text editor (like Ultra Edit) that allows to modify the CR/LFs from Unix text file to Windows text files or vice versa (i.e. to repair them). Please let me know whether this was helpful! Dirk Nicole wrote: > I cannot open the EpiData rec files from my colleague, the error > message "one or more records are corrupted" shows up. My colleague > can open the files normally. We are both using EpiData version 3.1. > > I looked at the files in the notepad, but it seems to me that they > look like my own files (which are fine). > > Can somebody help me? I need my colleague's files to validate > duplicate files with my files. ======================================== Dr. Dirk Enzmann Institute of Criminal Sciences Dept. of Criminology Rothenbaumchaussee 33 D-20148 Hamburg Germany phone: +49-(0)40-42838.7498 (office) +49-(0)40-42838.4591 (Mrs Billon) fax: +49-(0)40-42838.2344 email: dirk.enzmann(a)uni-hamburg.de http://www2.jura.uni-hamburg.de/instkrim/kriminologie/Mitarbeiter/Enzmann/E… ========================================

1 1

Re: Import XML EpiData files from R
by epidata-list＠lists.umanitoba.ca 02 Aug '12

02 Aug '12

Jamie, Thank you for your effort. Sometimes I use Stata format as an intermediate as Stata datasets contains all the data dictionary. However, for data management within clinical research (such as checking for duplicates, NAs fields, inconsistencies and so on) doing repetitive procedures manually is not that effective. Have you ever thought to share this development effort with the R core team? The R guys which developed and maintain the foreign package? Regards, Dr. Pedro Emmanuel A. A. do Brasil Curriculum Lattes: http://lattes.cnpq.br/6597654894290806 Instituto de Pesquisa Clínica Evandro Chagas Fundação Oswaldo Cruz Rio de Janeiro - Brasil Av. Brasil 4365, CEP 21040-360, Tel 55 21 3865-9648 email: pedro.brasil(a)ipec.fiocruz.br email: emmanuel.brasil(a)gmail.com ---Apoio aos softwares livres www.zotero.org - gerenciamento de referências bibliográficas. www.broffice.org ou www.libreoffice.org - textos, planilhas ou apresentações. www.epidata.dk - entrada de dados. www.r-project.org - análise de dados. www.ubuntu.com - sistema operacional

1 0