February 2007 - EpiData-list - University of Manitoba Mailing Lists

Editing graphs using Epidata analysis
by epidata-list＠lists.umanitoba.ca 06 Feb '07

06 Feb '07

Hallo, I downloaded the test version of the latest Epidata analysis sofware.My problem is;How do I edit a graph so that the percentages appear in each bar or in pie chart. I think I have communicated. Thanks Caleb Ouma Ongong'a +254721-953790, +254733890191 P.O Box 756556-00200 Nairobi-Kenya "Remember that happiness doesn't depend on what you are or on what you possess, but only on how you think." --------------------------------- It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar.

1 1

Today autofield
by epidata-list＠lists.umanitoba.ca 05 Feb '07

05 Feb '07

Hello all, I have been reading the epidata list for while but never tryed to send anything so far. It has been a while that I cant get the field <d/m/y-today> work at enter data. I´ve tryed other today autofields but none have worked so far. When I edit chek, this field appears to be working because the today date is there and field is not open for edition. However, when I open the enterdata, the field is always empty and, of course, I cant enter the date in there. My work around, although not as efficient, is to use the <dd/mm/yyyy> with the REPEAT comand in the check file. Is it some sort of bug or Im doing something wrong? Best regards, may the FORCE be with you all, Pedro Brasil Instituto de Pesquisa Clinica Evandro Chagas Fundação Oswaldo Cruz Av. Brasil 4365, Rio de Janeiro, Brasil -- Abraço forte e que a força esteja com você, Pedro Emmanuel

1 1

How to get test version of EpiData Analysis v2
by epidata-list＠lists.umanitoba.ca 02 Feb '07

02 Feb '07

Point your browser to : Http://www.epidata.dk/testing.php and click on: "Complete Setup" or click directly on this link: http://www.epidata.dk/php/downloadc.php?file=setupepidatastattest.exe Notice that test versions should always be used with caution until they are released from the official download page at http://www.epidata.dk/download.php Kind regards Jens Lauritsen EpiData Association

1 0

Re: [EpiData-list] Validation duplicate files
by epidata-list＠lists.umanitoba.ca 02 Feb '07

02 Feb '07

Hi Charity and Lars: There are two ways for duplicate data entry: 1) independent of sequence 2) dependent on sequence 1) If you use a field with unique identifier, you can enter the data independently of sequence twice, and then compare the two files later on that unique identifier. In this instance two data entry groups can enter add the same time part A and part B and then switch for second entry. 2) You can use the "Tools" "Prepare Double Entry Verification". If you do not tick and choose the option "Match records by field" (and choose the Unique identifier), then the second entry will by default follow the record number, and thus sequence matters. If you choose that option, the first data entry group will still have to await completion by the first data entry group. As Charity says, it is critical in any case to have a truly unique identifier which can by assured by KEY UNIQUE. Seemingly, Lars, you did not have that. You must thus identify the records with duplicate identifiers and or missing identifiers in both files, mark them for deletion (but not packing" and then compare. You deal then separately with the problematic records in both files, most simply perhaps by reentering them properly and independently in both files. Regards, Hans Hello Lars, I just did a small test of this to make sure, and the ordering/sequence of IDs in the two files does not make a difference when Validating Duplicate Files. What will cause a problem is if there is a duplicated ID in one of your two files - are you sure that the Case IDs are unique? You should have "KEY UNIQUE 1" included in your .chk file for the ID variable to ensure this. Kind regards, Charity On 2/1/07, epidata-list(a)lists.umanitoba.ca <epidata-list(a)lists.umanitoba.ca> wrote: Dear Epidata_list, I'm a new member of this list and a fairly new user of the Epidata software. In attempting to validate duplicate files not entered in same sequence by two observers I have difficulty in performing the test under documebt/validate duplicate files. Attempting to perfom the test with a selected key field of case-id an error is given; "Duplicate keys found" and the validation is terminated. Is it possible to perform a comparison of the two datasets despite the fact that the registrations are not performed in same sequence with regard to registration of the observations? Siincerely, Lars -- Hans L Rieder, MD, MPH Jetzikofenstr. 12 3038 Kirchlindach Switzerland Tel: +41 31 829 4577 Mob: +41 79 321 9122 Web: http://www.tbrieder.org

1 0

Testing Epidata Analysis V2.0
by epidata-list＠lists.umanitoba.ca 02 Feb '07

02 Feb '07

Hi, How can i have an Epidata Analysis V2.0 for make some testing? Thanks ___________________________________________ Dr Jean-Paul DIBY-KONAN Médecin Santé Publique MCM Santé de la Reproduction Institut Médecine Tropicale Kapucinessenstraat 8 B-2000 Anvers Belgique ----- Message d'origine ---- De : "epidata-list-request(a)lists.umanitoba.ca" <epidata-list-request(a)lists.umanitoba.ca> À : epidata-list(a)lists.umanitoba.ca Envoyé le : Jeudi, 1 Février 2007, 19h15mn 13s Objet : EpiData-list Digest, Vol 40, Issue 1 Send EpiData-list mailing list submissions to epidata-list(a)lists.umanitoba.ca To subscribe or unsubscribe via the World Wide Web, visit http://lists.umanitoba.ca/mailman/listinfo/epidata-list or, via email, send a message with subject or body 'help' to epidata-list-request(a)lists.umanitoba.ca You can reach the person managing the list at epidata-list-owner(a)lists.umanitoba.ca When replying, please edit your Subject line so it is more specific than "Re: Contents of EpiData-list digest..." EpiData-list mailing list ___________________________________ Today's Topics: 1. Tables in 2.0 R. 1 Build 104 of Epidata Analysis (epidata-list(a)lists.umanitoba.ca) ---------------------------------------------------------------------- Message: 1 Date: Thu, 1 Feb 2007 08:04:10 -0800 (PST) From: epidata-list(a)lists.umanitoba.ca Subject: [EpiData-list] Tables in 2.0 R. 1 Build 104 of Epidata Analysis To: epidata-list(a)lists.umanitoba.ca Message-ID: <398980.61861.qm(a)web32105.mail.mud.yahoo.com> Content-Type: text/plain; charset=iso-8859-1 Hi, Thank you for introducing the test version of Epidata Analysis V2.0. I tried to do some tables using it but no infrential statistics is performed. Just an r*c table is shown. Even for "Means" command, just descriptive statistics is shown. Thanks Reza ____________________________________________________________________________________ It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar. http://tools.search.yahoo.com/toolbar/features/mail/ ------------------------------ ________________________________________ EpiData-list(a)lists.umanitoba.ca http://lists.umanitoba.ca/mailman/listinfo/epidata-list End of EpiData-list Digest, Vol 40, Issue 1 ******************************************* ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com

1 0

Validation duplicate files
by epidata-list＠lists.umanitoba.ca 01 Feb '07

01 Feb '07

Dear Epidata_list, I'm a new member of this list and a fairly new user of the Epidata software. In attempting to validate duplicate files not entered in same sequence by two observers I have difficulty in performing the test under documebt/validate duplicate files. Attempting to perfom the test with a selected key field of case-id an error is given; "Duplicate keys found" and the validation is terminated. Is it possible to perform a comparison of the two datasets despite the fact that the registrations are not performed in same sequence with regard to registration of the observations? Siincerely, Lars

1 1

Re: Release of EpiData Analysis v2.0 for testing
by epidata-list＠lists.umanitoba.ca 01 Feb '07

01 Feb '07

As announced a short while back the module is now available for testing. A short example should help users getting started on the test. 1. Expect that some/many set commands have changed. E.g. Obsolete ones in version 2: Set statistics, set percentages, set table reverse etc 2. You only get what you ask for. e.g.: tables v1 v2 // will only give the counts tables v1 v2 /R // will give row percentages (column:/C, total: /T) tables v1 v2 /T /EX // will give a chi square test and with /EX also exact tests for 2x2 tables tables v1 v2 v3 /T /EX // will do a stratified analysis with overall exact testing as well. tables v1 v2 v3 v4 /OA //will make a condensed outbreak analysis table tables v1 v2 /SD // will sort descending instead of the default ascending sort on row and column tables v1 v2 /SRAT // will sort ascending on the row total /SRDT would be descending 3. replacement for epitables or etab will be typically (to have highest value as case and exposure): tables v1 v2 v3 /sd /t Many aspects are not final yet - notice it is a test build, e.g. some issues remain on medians in SPC graphs. Therefore the front page also states: Notice - this is a premature test build - only for experienced test persons ! regards Jens Lauritsen EpiData Association

1 0

EpiData Analysis: testing of version 2.0.1.104
by epidata-list＠lists.umanitoba.ca 01 Feb '07

01 Feb '07

Public testing of version 2 of EpiData Analysis can now begin. A lot of work has been done to reshape internal parts of EpiData Analysis. All users are now encouraged to participate in the testing. A system of comparing estimates, counting with results of Stata or Epi6 is applied. Currently the system contains around 1000 different tests. But maybe the system is not taking care of all problems, therefore user tests are also important. A complete list of changes is shown at http://www.epidata.dk/analysisversioninfo.htm. Main points are: Output is simplified. You only get what you ask for. To get more add options (e.g. /T) to the command Tables Extended (sorting, percentages, weights, outbreak) Metadata commands: missingvalue, labelvalue, rename Outbreak analysis: "tab outcome exposure variables /oa" "epicurve datevar outcome group" The test version is placed at: Http://www.epidata.dk/testing.php Please discuss the new version on this list. If you find definite bugs report to http://www.epidata.dk/php/mantis, where all development is documented. .............................................................. Regarding the discussion last week of differences btw. open-source and free software. As announced earlier a "master plan" for rewriting all EpiData Software to Open-Source as well as platform independence is part of the general development plan for EpiData. Releasing software as open-source makes no sense if the structure and content of the product is not sufficiently modular to allow for several independent development lines. Someone might disagree with me on this, but knowing how fragile software development is and seing the increased requirements for documentation and quality assurance I am assured that a controlled situation is preferable at this point in time. For almost all end users having a stable, quality assured software line is more important than having access to independent and possibly confusing development. But there should be no doubt that the aim is at an appropriate time to release the product source-code as open-source. Should anyone have a lot of energy or time to add to the project there are many issues needing assistance, e.g. answering questions on the epidata-list, assisting in sorting incoming mails to the help line, releasing mails for the epidata-list coming from un-subscribed persons, creating a FAQ collection such as that running for Stata at http://www.stata.com/support/faqs/ or joining a group running a wiki for EpiData, which could contain the FAQ. A start of this can be seen at www.epidata.org/wiki, but will not be announced before such a group has been established (A coordinator has been found). Notice also that for EpiData Entry users can develop their own CHK file commands. Modules for doing so (source code and examples) are found on http://www.epidata.dk/documentation.php .............................................................. Kind regards Jens Lauritsen EpiData Association

1 0

Tables in 2.0 R. 1 Build 104 of Epidata Analysis
by epidata-list＠lists.umanitoba.ca 01 Feb '07

01 Feb '07

Hi, Thank you for introducing the test version of Epidata Analysis V2.0. I tried to do some tables using it but no infrential statistics is performed. Just an r*c table is shown. Even for "Means" command, just descriptive statistics is shown. Thanks Reza ____________________________________________________________________________________ It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar. http://tools.search.yahoo.com/toolbar/features/mail/

1 0